Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Heater or no Heater?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 55
Joined: Thu Aug 11, 2005 9:30 pm
Location: Greensborough, Melbourne

Heater or no Heater?

Post by ike181 »

Ey guys iv got a Mq and the heater takes up heaps of space and is in the way on the dash I wanna make? wat should I do? Give the heater the ass or wat?
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

A functioning demister is a roadworthy requirement. You can remove your heater, but you need a demist function of some description.
Posts: 199
Joined: Thu May 04, 2006 5:18 pm

Post by vorno_18 »

thats true but name one inspector that checks if the demister works

just leave the lines going to the firewall and block off or loop them inside under the dash, that way it looks like it works from the engine bay
60 series cruiser, GU patrol
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

If you live in melbourne, i would have thought you'd find a way to make it fit?? :shock:
60 + Turbo, 33"s :armsup:
Posts: 156
Joined: Tue Sep 27, 2005 7:23 pm
Location: Dandenong ranges

Post by Dyna Beast »

Had a old Toyota Stout that I got a roadworthy for.One of the isues was the demister.It worked,only just.One point that was raised.If you have quarter windows that open they the act as a demister and the problem is resolved.Sp there is at least one place that does check the demister.
Cheers
Hybrid rover ute. Isuzu diesel. Custom suspension. Winch. Snorkel etc. etc.
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

I've been done for the fan not working :? but not the heater not being there.
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

me

Post by embryo »

vorno_18 wrote:thats true but name one inspector that checks if the demister works

just leave the lines going to the firewall and block off or loop them inside under the dash, that way it looks like it works from the engine bay
ME!

btw i dont care if it looks right, i like to feel the hot air on my hand

however its only illegal if you get caught!
dont tell the missus
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Hot rod shops have small electric heaters available for rego/roadworthe/ADR compliance (6" cubed IIRC). Give them a call...
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

You'll regret not havin' it next winter :twisted: :twisted:
bru21 wrote:What happens in goat, stays in goat!
Posts: 1698
Joined: Sun Nov 28, 2004 7:26 pm
Location: Canberra Australia

Post by Ezookiel »

Come live in Canberra, you won't even be having this discussion !!!!!
In fact it might be more along the lines of how to soup up your heater :)
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

Ezookiel wrote:Come live in Canberra, you won't even be having this discussion !!!!!
In fact it might be more along the lines of how to soup up your heater :)
There you go thats were your overheating problem stems from
If you dont have panel damage you ain't trying hard enough
Post Reply

Who is online

Users browsing this forum: No registered users and 133 guests