Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G'day guys,
the previous owner of my 40 series was running the rear diff without axle seal so the oil and grease have been mixed together. also there is not diff breather so the oil and grease contains a bit of toolangi mud aswell just wondering how i would go about cleaning the old dirty oil/grease/mud out of the axle tubes before i put in new oil.
Thanks for your help,
-Calvin
I used petrol and it came up great just remember to re oil everything as you go
I mask would help too; i did mine out in the open and still got a headache from the fumes
Thanks for the help fellas
pulling the centre out and i will prob use petty. also going to push rage up the tubes to the centre to clean it right up bit expensive though
-Calvin
just wondering how i would go about cleaning the old dirty oil/grease/mud out of the axle tubes before i put in new oil.
