Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

EXAUST MANIFOLD ON THE VITARA 1.6 CARBY

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

EXAUST MANIFOLD ON THE VITARA 1.6 CARBY

Post by Daniel »

CAN I BOLT MY EXTRACTORS OFF MY SUZUKI SIERRA 1.3 STRAIGHT UP TOO MY VITARA 1.6 CARBY MOROR..
IF SO HOW??
IF NOT, WHERE CAN I GET A MANIFOLD FOR MY VITARA 1.6

DAN!
uh huh
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

yes u can if its an 8 valve, ya just to heat up the bottom of the extractors and bend them down to clear the body, because the vit motor is taller. and please dont shout we r tryin to sleep.
buggy time............
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Bazooked - Do the EFI ones clear the chassis/body in the sierra.

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

nicbeer wrote:Bazooked - Do the EFI ones clear the chassis/body in the sierra.

Nic
no depending on type.

most have duel pipes near the chassis. its the outer pipe that hits on the engine mount/chassis.

to fix this we used to cut the middle section (from 4 into 2)just after the bend and just before the bend (2 into 1 ) then reweld in a new bit of pipe so it sits 1" further back compared to the other pipe..
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

there is a few different types i got the wrong 1 first but second go was much better, will have a look tomorrow and tell ya the brand u need to get.
buggy time............
Top
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}

Post by Santos »

if you replacing the stock set up can i have it :cool:
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Top
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

back to the topic

Post by Daniel »

keeep on track
back to my topic hahaha,
sorry for yelling

so the extractors i have now that were off my 1.3 sierra will fit on to the 1.6 carby 8 valve.

just need to bend the bottom to clear body correct?

Thank you

Dan!
uh huh
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest