Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I brought a 63 jeep fc170 its lifted up maybe 10 inches with 31s flat tray, ford motor yes shame that ,but that is what it is.
looking for other owners and info on them the rear diff has been changed to what im not shore it looks huge.
when i brought it, i brought knowing nothing about them and thought that it was normal height then look on net saw how low they where standed now i think its realy cool
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
I'm not shore its true but it is right up there somewhere. how do i add pics I dont have any of mine yet but I have some pics from the states of others at standed height and some lifted about the same as mine and its a huge difference from the top of the 31s i have about 250mm to the flare standed the wheel guessing something like 225/75/16 would be inside the guard so its huge and my wheel track outside to outside is 1900mm wheel base is ony 2100mm so yes it looks huge thats why i got it its going to replace my commordore v6 powered mazda E2000 tray truck which is now for sale to finish the fc
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
check out the pic to the left I thought I'd point it out, as you showed interest its not mine , mine is a single cab not duel and has a flat tray and a touch higher I think, I have not seen it in two months since I brought it and dumped it at my olds farm, but next year it will be a driver
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
with 31s flat tray, ford motor yes shame that ,but that is what it is.
cool 
its true but it is right up there somewhere. 
how do i add pics 
I dont have any of mine yet but I have some pics from the states of others at standed height and some lifted about the same as mine and its a huge difference from the top of the 31s i have about 250mm to the flare standed the wheel guessing something like 225/75/16 would be inside the guard so its huge and my wheel track outside to outside is 1900mm wheel base is ony 2100mm so yes it looks huge thats why i got it its going to replace my commordore v6 powered mazda E2000 tray truck 
10" lift an an FC170