the dam slip yoke slipped out when i replaced the uni joints and now theres a vibration at around 100km,,,,,,,, reason why i did not mark it befor hand was that i had no intention of removing the slip yoke......
ive tried to re align it and iam sick of doing it after 6 bloody goes
who in brisbane can help me
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
re-align or balance of rear tail shaft
Moderators: toaddog, Elmo, DUDELUX
re-align or balance of rear tail shaft
Dont worrys There's No Sugar
My 4x4 Is too clean.... Needs a Mud Pack
My 4x4 Is too clean.... Needs a Mud Pack
A Little theory...
http://www.roddingroundtable.com/tech/a ... eline.html
If you look at the picture, you will see that the yokes must line up exactly to minimise vibration.
http://www.roddingroundtable.com/tech/a ... eline.html
If you look at the picture, you will see that the yokes must line up exactly to minimise vibration.
Who is online
Users browsing this forum: No registered users and 1 guest