Im doing a few mods to a 79 rangie... one of them is extending the chassis from 100 inch to 110... The engineer Im planning on using has told me that to do the calcs and engineer $1000 - 1500 would be fair....
FAWK ME..... Im using 2 chassis and angle cutting one 10 inch longer than the other then join... I do know abit about how it goes... but what do you recon of the price??????????
Can you recomend someone around melb... Also it will be rebodied with a HQ 1 tonner cab..
Mark
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Melbourne chassis engineer
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Melbourne chassis engineer
God gave us grinders and hammers to make things flex......
$1k seems to be the going rate for big stuff like that. Trick is to get EVERYTHING you want done looked at at the same time AND TALK TO THEM BEFORE YOU START!!! Someone is going to have to do the technical maths on the stretch, and I've got a feeling it isn't going to be you....
The prices are a bit steep due to the indemnity/liability insurance the engineers are required to carry (bit like a doctors indemnity insurance). Simply covering their own arse if something goes belly up (fair enough...).
The prices are a bit steep due to the indemnity/liability insurance the engineers are required to carry (bit like a doctors indemnity insurance). Simply covering their own arse if something goes belly up (fair enough...).
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Re: Melbourne chassis engineer
yup, thats the rate now. his arse is on the line if things go pearshaped...
x2 on Bill and his no bullshit approach. I used him a couple of years ago and he gave a good estimate of time needed and hourly rate at the start rather than a high flat fee for 30 min work.
His email was toddteag@tpg.com.au but I don't know if thats still current
His email was toddteag@tpg.com.au but I don't know if thats still current
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
When I last shopped around for one, the going rate was about $2k for a good one.Gheto_Modz wrote:A 110 chassis is my fall back option.... but I havnt priced one as yet.... u know what they are worth?
Mark
Btw - everyone I know who has extended a rangie chassis has been made to plate the join - either internally or externally - using L or C chaped channel for the plates. So I doubt an engineer would pass two chassis that have been joined with an angled cut and not plated. But talk to the engineer about it.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 43 guests