Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 factory turbo psi levels

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 101
Joined: Sun Mar 27, 2005 3:45 pm

2.8 factory turbo psi levels

Post by adamj1300 »

i was just wondering what is the factory turbo psi levels for a 99 GU, is it possible or worth it to turn the psi up, im not so much worried about running the motor, at higher temps or ruining its engine life as i plan for an engine swap in the nest 12 months!
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

I believe its in the 12psi range, it can be turned up but you will need to add fuel to get more power out of it.

Andy
Top
Posts: 127
Joined: Mon Jul 21, 2003 6:56 pm
Location: Bucharest, Romania, Europe

Post by Gabriel »

From what I remember...

The turbo pressure should be 0.65 - 0.7 atm. You can increse the pressure by modifing the wastegate actuator lever, making it longer.
BUT: you must remove the "valve pressure fuse device", located on the intake manifold, that is factory set to open to the athmosphere at 0.75 atm.

Regards, Gabi
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 10 guests