Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
leaky pinion seal
Moderators: toaddog, Elmo, DUDELUX
leaky pinion seal
hey gus i notieced that i got a bit of oil commin out of my pinion end off my diff center is there any way to replace the seal????? ay help will be apreciated........ oh its on a ln106 lux
[b][i][u][color=#0000BF] just another nutter with a hilux [/color][/u][/i][/b]
you take the tail shaft off of course and remove the pinion nut
count the number of turns it takes to remove the nut , as you will put it on the same number of times
pull pinion flange off and remove seal
check the pinion flange for wear where the seal runs as you may need a speedy sleave or a new flange or even a quick sand smooth
knock new seal in and fit pinion with grease on the seal and seal surface area on the flange
fit nut with locktight and do up ,lock the the nut back in the pinion shaft groove to n check oil level
or take it to a mechanic and he will have it done quicker than you can
count the number of turns it takes to remove the nut , as you will put it on the same number of times
pull pinion flange off and remove seal
check the pinion flange for wear where the seal runs as you may need a speedy sleave or a new flange or even a quick sand smooth
knock new seal in and fit pinion with grease on the seal and seal surface area on the flange
fit nut with locktight and do up ,lock the the nut back in the pinion shaft groove to n check oil level
or take it to a mechanic and he will have it done quicker than you can
Who is online
Users browsing this forum: No registered users and 3 guests