Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

coil springs for HZJ105

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 68
Joined: Thu Sep 09, 2004 8:52 pm
Location: Italy

coil springs for HZJ105

Post by giacomo.m »

Hi all,
does anyone know the Toyota genuine coil spring specs (lenght/rate ) for HZJ105 ?
and what is the best bushes or castor plates ?

Thank you.

Giacomo
Top
Posts: 68
Joined: Thu Sep 09, 2004 8:52 pm
Location: Italy

Post by giacomo.m »

Hmmmm 20 views, and no replys. Why ?
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

because they are scared of Italians....caster plates are best, but you need a 4 inch lift to use the 5 degree angle adjustment...just slot the front holes down, and put flat washers on the bolt, adjust and weld washers on to diff.
Andrew
Top
Posts: 68
Joined: Thu Sep 09, 2004 8:52 pm
Location: Italy

Post by giacomo.m »

thank you dow50r for your reply.
but why they are scares to you from the italians ?
therefore for 2 or 3 inch lift ,only kit OME bush ? no caster plates ?

Giacomo
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests