Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tab or Bracked for UHF antenna mount on BB

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 5
Joined: Sun Dec 03, 2006 8:41 pm

Tab or Bracked for UHF antenna mount on BB

Post by Sailfish »

Getting a TX4400 fitted to my pajero next week. But the alloy bar does not have a tab for the antenna. What do you guys think of getting a tab welded on verses using a stainless steel bracket?

Mal
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

if you can get one welded on for less than a bracket is worth, id say go for it! with an alloy welded one you cant go wrong as with a bolt on one they will eventualy rust and suck big time! go the welded tab dude! but see if you can get them to weld one on the oppiste side at an even space just incase you want to move it or put a HF in aswell! ;)
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

The bolt on brackets are SS so no probs with rust, welded will look neater though.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 5
Joined: Sun Dec 03, 2006 8:41 pm

Post by Sailfish »

ARB guys are saying bracket will be better. They say the tab would be aluminum and can bend and break easier than the SS bracket. Thoughts on that??
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Sailfish wrote:ARB guys are saying bracket will be better. They say the tab would be aluminum and can bend and break easier than the SS bracket. Thoughts on that??
rubbish! i bet if they did alloy welding at ARB they wouldnt say that! ive had tabs welded on my bar before and they are heaps tuffer than a bracket and no mater what bracket you get eventualy they do get all scummy and loose the plot weather it be the bolts or the crap between the bracket and the bar! simply ask ARB if brackets are better then why dont they leave all the tabs off there bullbars and sell all there bullbars with brackets for there arials and lights? ;)
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 18 guests