Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

roll cages?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

roll cages?

Post by mule75 »

does anyone know if there are standards for internal roll cages and if they need an engineers cert to confirm with CCDA??
Posts: 88
Joined: Thu Nov 02, 2006 8:26 am
Location: Brisbane

Post by AussieGQ »

Yes and yes.
Shane

91 LWB GQ TD42, Recaro Seats, Tait T2020 UHF, Tait TM8255 Trunk, 3" Lift and 33's. Turbo coming soon :D
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

do you know how i can find out info about the standards??
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Post by MYTTUF »

http://ccda.4wd.org.au/cms/index.php?na ... tit&lid=84
is the CCDA rule book and in it you should find the roll bar specs.
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

Has anyone been able to fit a cage in a GQ internally I was going to bend one up but cant pass it next to seats in the front.
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

go through the dash. plenty of us have done it
Jeep Wrangler TJ

Jeep Cherokee XJ
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

thanks for the info.
Posts: 19
Joined: Sat Nov 18, 2006 8:36 pm
Location: Melbourne, Australia

Post by SeptemberSquall »

Cool1 lol
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests