Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body lift kits where?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

body lift kits where?

Post by crack »

gday all

just wondering who makes a decent body lift kit? ive had a look at snakeracing's one but its getting a lil on the expensive side coming up to christmas. can anyone sugest somneone else?


cheers jack
Top
Posts: 85
Joined: Wed Dec 14, 2005 5:02 pm
Location: Perth

Post by zookdave »

try places like ARB or just 4x4 specialists. BTW what model was it for?
Top
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

its for a 92 single cab lux. i dont deal with arb down here they are idiots...have no idea what they talking about. no real 4x4 specialist down here might have to wait till i go to perth. what about making them?
Top
Posts: 180
Joined: Thu Apr 27, 2006 7:15 pm

Post by hilux_bondy_007 »

ebay and but bolts from nut and bolt shop, high tension
Top
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Contact:
Contact JOHNZ

Post by JOHNZ »

Bodylift to suit hilux $220

Complete - Blocks /Bolts / Instructions.
cheers mate
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Top
Posts: 85
Joined: Wed Dec 14, 2005 5:02 pm
Location: Perth

Post by zookdave »

any idea how much the postage to WA would be?
Top
Posts: 40
Joined: Wed Oct 04, 2006 11:12 pm
Location: sydney

Post by TOYTRUK »

HEY,if you go to a bearing supply place you can buy nylon rod ,just cut to the lengths you need and drill the centre holes in a drill press.
mine cost me 60.00 for the rod.and longer high tensile bolts with nyloc nuts were 55.oo. if you like you could sleeve the blocks,otherwise make the hole a nice tight fit.cheers. that was for ten mounts, bolts and nuts on an early 4runner.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest