Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diesel Oil - Your Pick?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 1585
Joined: Wed Jan 04, 2006 9:30 pm
Location: Western Sydney

oil

Post by Toli »

I use Valvaline 15w 40 super diesel in my 80. Only cause the previous owner had brough it by the drum load and only used it. It seems to work well and stays clean.

Just another question how long before you oil is black after you put in fresh. I am up to 4000km's since the last change and it is only starting to darken now. The Mrs pulsar oil is more black at that many km's than the 80.
Dave, Nat, Braiden, Ethan and now Elizabeth

Bye Bye 80 Series............Hello XR6T
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Re: oil

Post by Ruffy »

oils aint oils.
Last edited by Ruffy on Sat Dec 16, 2006 4:04 pm, edited 1 time in total.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Re: oil

Post by Ruffy »

Toli wrote:I use Valvaline 15w 40 super diesel in my 80. Only cause the previous owner had brough it by the drum load and only used it. It seems to work well and stays clean.

Just another question how long before you oil is black after you put in fresh. I am up to 4000km's since the last change and it is only starting to darken now. The Mrs pulsar oil is more black at that many km's than the 80.
Engine oils are designed to clean, cool, lubricate and transfer waste. Much like your blood in your body.
If your oil isn't getting black in a diesel then you've either got the worlds most efficient engine or maybe your engine oil isn't doing it's job.
Alot of people running LPG are of the misconceiption that they don't need to change there oil because it doesn't go black. this is wrong. Oil collects all the crap from your engine. As soon as it comes in contact with carbon monoxide it starts to break down so the color isn't relevant in that respect.
The dirtier your oil is the more it's cleaned and the more crap it's collected.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 98
Joined: Thu Sep 21, 2006 4:14 pm
Location: Jabiru

Post by danos »

Hmm looks like the Penrite HPR 15w50 it is for me.

One more question.

Im guessing the majority of people on this forum are from the cooler climates of OZ. Ive just moved to the NT and was wondering if I should look into a slightly different oil as I dont think it ever gets below 20 degC here?

Cheers
Posts: 1585
Joined: Wed Jan 04, 2006 9:30 pm
Location: Western Sydney

Re: oil

Post by Toli »

Ruffy wrote:
Toli wrote:I use Valvaline 15w 40 super diesel in my 80. Only cause the previous owner had brough it by the drum load and only used it. It seems to work well and stays clean.

Just another question how long before you oil is black after you put in fresh. I am up to 4000km's since the last change and it is only starting to darken now. The Mrs pulsar oil is more black at that many km's than the 80.
Engine oils are designed to clean, cool, lubricate and transfer waste. Much like your blood in your body.
If your oil isn't getting black in a diesel then you've either got the worlds most efficient engine or maybe your engine oil isn't doing it's job.
Alot of people running LPG are of the misconceiption that they don't need to change there oil because it doesn't go black. this is wrong. Oil collects all the crap from your engine. As soon as it comes in contact with carbon monoxide it starts to break down so the color isn't relevant in that respect.
The dirtier your oil is the more it's cleaned and the more crap it's collected.
Thanks for that. It is not like it is the same from when I first change it to 5000km. When it gets to 5k it is black. When I owned a a pajero TD it was more black (if that sounds right).

When I did a oil change in the pajero I could put a litre of new oil in the top let it run out the bottom and it was as black as the stuff I just took out. This does not happen in the crusier. May because of direct injection.
Dave, Nat, Braiden, Ethan and now Elizabeth

Bye Bye 80 Series............Hello XR6T
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: oil

Post by Shadow »

Toli wrote:
Ruffy wrote:
Toli wrote:I use Valvaline 15w 40 super diesel in my 80. Only cause the previous owner had brough it by the drum load and only used it. It seems to work well and stays clean.

Just another question how long before you oil is black after you put in fresh. I am up to 4000km's since the last change and it is only starting to darken now. The Mrs pulsar oil is more black at that many km's than the 80.
Engine oils are designed to clean, cool, lubricate and transfer waste. Much like your blood in your body.
If your oil isn't getting black in a diesel then you've either got the worlds most efficient engine or maybe your engine oil isn't doing it's job.
Alot of people running LPG are of the misconceiption that they don't need to change there oil because it doesn't go black. this is wrong. Oil collects all the crap from your engine. As soon as it comes in contact with carbon monoxide it starts to break down so the color isn't relevant in that respect.
The dirtier your oil is the more it's cleaned and the more crap it's collected.
Thanks for that. It is not like it is the same from when I first change it to 5000km. When it gets to 5k it is black. When I owned a a pajero TD it was more black (if that sounds right).

When I did a oil change in the pajero I could put a litre of new oil in the top let it run out the bottom and it was as black as the stuff I just took out. This does not happen in the crusier. May because of direct injection.
your right, direct injection is much cleaner than indirect injected engines

when i do an oil change, it takes 5 minutes for the oil to be completely black. Hj60 indiorect injected 2H
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

danos wrote:Hmm looks like the Penrite HPR 15w50 it is for me.

One more question.

Im guessing the majority of people on this forum are from the cooler climates of OZ. Ive just moved to the NT and was wondering if I should look into a slightly different oil as I dont think it ever gets below 20 degC here?

Cheers
In the toyota 2H manual it does show a graph of temperatures and the oil that should be used.

Im not really certain on how to read the graph properly as it is very vague, but from what i think is going on, 15/40 is good for as low as -12degrees C and any temp above this.

It does show 20-50 and 20-40 weight oils on the same arrow thingo-majig so im assuming 20-50 can be used for the same range.

10-40 and 10-50 go a little lower to -18 degrees C and any temp higher than this, and 5-30 shows a max temperature of 10 degrees C and any temperature below this.

So if you plan on seeing temps close to 5degrees C best to stick witha 15-40 or 15-45, but if you dont plan on seeing temps below 16 degrees C you could use a 20-50, but seriously, a 15-40 or 15-45 is really the oil to use.


If you plan on driving the arctic circle use 5-30 oil.
Posts: 39
Joined: Tue Mar 21, 2006 8:44 pm

Post by tumoit »

penrite
Posts: 78
Joined: Sat Mar 05, 2005 6:49 pm
Location: Sorrento, Vic

Post by thewayitis »

CAT oil is designed for earthmoving machinary. Cat couldnt find a good enough oil so they created there own. I also use Cat oil filters, Cat fuel filters, and im trying to find a ar filter at the moment
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

edited
Last edited by joel HJ60 on Sun Jul 25, 2010 4:37 pm, edited 1 time in total.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 77
Joined: Sat Jun 24, 2006 1:03 pm
Location: Adelaide

Post by Andres »

Penrite 15W50

86 Cruiser 12HT with 305,000ks

Adelaide climate (gets pretty f-en hot in summer)

And the drum with tap the Penrite comes in sits nicely on the turbo mainfold and pours straight in! :D
1999 Mitsubishi Pajero | 1986 Toyota Landcruiser 12HT - Gone but not forgotten!
Posts: 49
Joined: Sat Jul 29, 2006 9:24 pm
Location: Canberra

Post by foster_the_fat »

Penrite 15-50 as above for 2H turbo, also use the 10L drum with the tap. It sits there nicely and drains in slowly.
Posts: 2
Joined: Thu Dec 14, 2006 7:53 am

Post by lewi_cruiser »

i ran CAT 15 -40 in my old mans navara, flushing with about 50 L before fillling it up every time. Before that it had 390 kms on it, using the same oil. Its got 450 now running like a dream. I dont recommend CAT oil for engines that are going from hot to cold alot, CAT detergents operate at a higher temps to normal domestic oils, but if you travel alot it's good. I run synthetic oil in my cruiser now, i had a metullurgist tell me to change to this. I haven't noticed any difference in performance or anything, but i do flush it as im changing it as well (i would only flush it if the oil is free, i waste a least 80-100L flushing and synthetic isnt cheap or so ive heard). And you were right before about if you oil isnt turning black somethings wrong. If you dont flush which is about everyone, it should turn black in about 500 km if that. but at the end of the day everyone, even guys with doctorites that went to uni and been doin this shit for 25 years still dis-agree with each other. I would though try and stick roughly to the same oil. (there is no evidence to back that up, i just guess that staying with the same isnt going to hurt the engine, but changing it might or might not...who knows). Best advice trial and error, there are an endless amount of opinions.
Lewi
Vinegar Stroke 4x4
Central QLD
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

lewi_cruiser wrote: I would though try and stick roughly to the same oil. (there is no evidence to back that up, i just guess that staying with the same isnt going to hurt the engine, but changing it might or might not...who knows). Best advice trial and error, there are an endless amount of opinions.
Anecdotal evidence only .. but

My older brother used to always use the smae oil in his MQ (what he got from the workshop .. I belive it was penrite) When he left his job he switched to mobil oil (not the cheapie stuff) same weight .. ate oil faster than a GU on the beach ate petrol Thought the motor was stuffed and by the look of the smoke billowing from the exhaust most people would agree ...

My grandad (retired mechanic) told him to swap back to the old oil he had been using .. oil consumption dropped massively ... kept the car another 55,000k's with further drama ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 14
Joined: Wed Nov 04, 2009 9:56 pm
Location: Tannum Sands

Post by 60seriesasthmatic »

Shell Rimula x and Sakura filters.
Posts: 211
Joined: Thu Oct 15, 2009 8:03 pm
Location: PORT STEPHENS

Post by rowenb »

Anyone used the german FUCHS oil? My spare parts bloke was selling that at a good price and used it for the last 4 years. Seemed to be a good oil as the vavoline i was running when i got it, the motor seemed to be a little noisier. I've been told by a few people that the fuchs is good stuff and was surprised no one is using it on the forum. Was i led down the wrong path?
Posts: 128
Joined: Tue Jan 20, 2009 12:33 pm
Location: Under your bed!!!

Post by mutilated »

Lubrimaxx Multi fleet 15w/40 cg/sj
just started using it at work and seems good. Not recomended for vehicles after 05 as they need a lower ash content oil.
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

Mobil delvac.
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Post by gu town »

penrite HPR 15-40 here every 5000. when i was in vic in winter my car would NEVER move until it was up to operating temp. even then i took it easy for a while because it's worth noting your oil warms up slower than your water.

am i the only one that cringes when people start their cars or anything and just drive? :cry:
GU td42 ute with go fast bits and go futher bits
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

gu town wrote:penrite HPR 15-40 here every 5000. when i was in vic in winter my car would NEVER move until it was up to operating temp. even then i took it easy for a while because it's worth noting your oil warms up slower than your water.

am i the only one that cringes when people start their cars or anything and just drive? :cry:
a car is there to serve man.

my opinion, If you cant get in a car and drive it, why have it.

I think it is very old fashioned to wait and warm a car up.
03 HDJ100R GXL / 94 FJ45-80
Posts: 14
Joined: Wed Nov 04, 2009 9:56 pm
Location: Tannum Sands

Post by 60seriesasthmatic »

rowenb wrote:Anyone used the german FUCHS oil? My spare parts bloke was selling that at a good price and used it for the last 4 years. Seemed to be a good oil as the vavoline i was running when i got it, the motor seemed to be a little noisier. I've been told by a few people that the fuchs is good stuff and was surprised no one is using it on the forum. Was i led down the wrong path?
We were using FUCHS oil at work in all the trucks it was a multifleet oil and they all burned between 10-15liters of oil between changes didnt matter how old the truck was.

Since changed to shell rimula x and no more oil burning.
If you look at the Shell lubefinder on their website they list the RIMULA X as the premium engine oil for a 2H.
Posts: 73
Joined: Wed Dec 13, 2006 5:21 pm

Post by Luxo »

Switched from Penrite HPR to Caltex Delo 400 in the old 1hz. Much quieter, seems to be a decent oil from all reports
I may be slow but I'm ahead of you!
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

castrol
94 Patrol Petrol 3.0L lift, tyres, winch
90 WT Serria locked diff, Muddies
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Post by DUDELUX »

went to get some penrite hpr 15w40, i was told that penrite do a 20w60, and its the same thing.
but i chose penrite as it came well recommended in this thread
MrsForby wrote: Oh I desperately truly love the taco.
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

fuchus is good stuff just expensive just dont think many people use it as it is not that common. if you want it you have to go looking for it.
Posts: 899
Joined: Mon Jan 01, 2007 8:11 am
Location: West Seedknee

Post by 4bdan »

I use Penrite 15-40w, but I'm thinking about giving the Magantec stuff a go next service.

I don't have any complaints about the Penrite stuff, it's just that I've never tried anything else to compare it to...
Back in a Lux again...
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Post by gu town »

Shadow wrote:
gu town wrote:penrite HPR 15-40 here every 5000. when i was in vic in winter my car would NEVER move until it was up to operating temp. even then i took it easy for a while because it's worth noting your oil warms up slower than your water.

am i the only one that cringes when people start their cars or anything and just drive? :cry:
a car is there to serve man.

my opinion, If you cant get in a car and drive it, why have it.

I think it is very old fashioned to wait and warm a car up.
how long do you want it to serve for?
GU td42 ute with go fast bits and go futher bits
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Post by gu town »

Shadow wrote:
gu town wrote:penrite HPR 15-40 here every 5000. when i was in vic in winter my car would NEVER move until it was up to operating temp. even then i took it easy for a while because it's worth noting your oil warms up slower than your water.

am i the only one that cringes when people start their cars or anything and just drive? :cry:
a car is there to serve man.

my opinion, If you cant get in a car and drive it, why have it.

I think it is very old fashioned to wait and warm a car up.
how long do you want it to serve for?
GU td42 ute with go fast bits and go futher bits
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

penrite make a 15/50
Z9s are shiite
I went to a shell 15/40 whick seems to cause less smoking
and use at the moment a K&N Oil filter which even for me is expensive
dose a great job
but I will be trying a westfield filter next as its been ok on my wifes car and a fark lot better than a carp ryco one
P.s i sell them for a living and have fitted them all to my car
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 10
Joined: Thu Aug 28, 2008 6:13 am
Location: sydney

oils

Post by wampbell80s »

I use mobil 15w 40 in my 1hz 80 series has fixed rear main leak
used 15w40 in gq 4.2 diesel nissan oil
used 10w40 in gu 3litre nissan oil
use mobil 1 0w40 in all mercedes benz cdi diesels
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests