Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2jzgte into hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

2jzgte into hilux

Post by killalux »

hey,
the 7MGTE in my lux developed a nasty rattle on the weekend, so i am considering swapping it for a 2jzgte rather than re-building.

question is has anyone done it, does it fit? i will be using the auto behind it aswell.

anyone got any pics?
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

A mate of mine has it done but it's in a 2wd (should be close if not same) it fits but very! neatly he said it's got about 10mm to firewall and the same from front of eng to rad. He couldn't fit it in with clutch assy and flywheel had to all go on from underneath don't see him very often if i do i'll get some pic's.
plenty of parts on the bench
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Post by killalux »

yeah i thought it would be close, my 7MGTE is only bout 10mm from firewall but my radiator is going in the back so thats no issue. my main concern would be clearance between the brake booster and the rear turbo.

pics would be great.
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Posts: 234
Joined: Fri Jan 27, 2006 11:12 am
Location: NZ

Post by Turoa »

Posts: 75
Joined: Tue May 23, 2006 1:19 pm
Location: brisbane

Post by evo wagon »

mate of mine did it in a hilux with twin up graded turbos. ring buzz engines on 07 32833722 as they were the ones that did it they should be able to point you in the right direction. it made 350hp at the wheels on 11psi
Posts: 1
Joined: Thu Dec 28, 2006 9:24 am

Post by Shifty79 »

Having played with Supras for years, when I heard a Hilux pull up with what was definitely a JZ motor I couldn't help but go up & talk to the owner. Was a fairly late 4WD model running a 2JZGTE with standard turbos and an auto box. Quizzed him on the fitment and he didn't know as it was done by the previous owner... but it definitely goes in.

If you have problems with the clutch/brake cylinder you could try swapping for a more compact unit... or if you've ever looked in a van you'll notice that they run a reversed pedal/cylinder arrangement with a flat booster which might well allow you to run them under the dash on your Hilux in a similar configuration.

Might be tricky to adapt but once done would give a great result & heaps more room in the engine bay.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests