Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Supercharged Suzuki Vitara 1600 16v Project

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 31
Joined: Fri Dec 08, 2006 7:14 am
Location: Invercargill, New Zealand

Supercharged Suzuki Vitara 1600 16v Project

Post by jeremyisme »

Hi,

I have started a thread on Offroad Express 4wd forum for my build if you want to follow it.

I will try to keep it up to date, and will try post some pics etc on it here aswell.

http://www.offroadexpress.co.nz/modules ... 1237#41237
Top
Posts: 16
Joined: Sat Dec 02, 2006 10:46 am
Location: Tauranga NZ

Post by Bluezuki »

Hi,

sweet!! just to let you know someone is interested and I will be following your build up.

cheers Ian.
If it's worth doing, Do it right the first time!!
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

ahh wicked dude, keep us updated!
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 245
Joined: Tue Jan 31, 2006 5:51 am
Location: Wellington, New Zealand

Post by mroffroader »

[quote="Bluezuki"]Hi,

sweet!! just to let you know someone is interested and I will be following your build up.

cheers Ian.[/quote]

me too :D and were all in NZ :armsup:
80 series landcruiser and a suzuki 413 :)
Top
Posts: 217
Joined: Thu Nov 30, 2006 12:33 pm
Location: Woodford

Post by FullbackNo1 »

Is your name jeremy cause that is my name and i am doing the same project but with a turbo
Top
Posts: 31
Joined: Fri Dec 08, 2006 7:14 am
Location: Invercargill, New Zealand

Post by jeremyisme »

Haha, yeah, my name is Jeremy

How far through are you?
Have you seen the guy Baldur's build? It looked quite good, but haven't found any recent info about how it is going now.
Top
Posts: 217
Joined: Thu Nov 30, 2006 12:33 pm
Location: Woodford

Post by FullbackNo1 »

Just started waiting for the car to come back from my friends place getting welded and rust fixed and the motor isn't started as i am not getting much money at the moment should be soon but
Top
Posts: 31
Joined: Fri Dec 08, 2006 7:14 am
Location: Invercargill, New Zealand

Post by jeremyisme »

Fair enuff, well hopefully I will be a fair way through my built and be able to sort out some of the EFI problems we are likely to run into, and be able to help you out when the time comes.
Top
Posts: 217
Joined: Thu Nov 30, 2006 12:33 pm
Location: Woodford

Post by FullbackNo1 »

Yer i say i am going to run into a few problems have you done any internal work on your engine for the supercharger
Top
Posts: 31
Joined: Fri Dec 08, 2006 7:14 am
Location: Invercargill, New Zealand

Post by jeremyisme »

Haha, nah, havent touched the engine yet. So I will just see how it goes, and if it blows, buy a new engine, and rebuilt the old one stronger, better, faster.
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Have sierra 1.3 with sc14 supercharger. Running 1.6 litre swift throttle body injection. Using a bypass for extra boost not required. Pistons lasted about 200km,then lost compression due to ring gap metal breaking away. Recomend using a turbo or induction type piston.









Image
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 31
Joined: Fri Dec 08, 2006 7:14 am
Location: Invercargill, New Zealand

Post by jeremyisme »

Hi,

Thanks for that info, how much boost were you running? Do you know what your fuel conditions were like? I am just wondering if the rings went due to too much compression or if it was detonating etc from running too lean.

Are there turbo pistons available for the Suzukis? Well, other than custom made really expensive ones I mean,
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Take a look at the teamswift page as they have most of the details on there. Honda ones are almost the same.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

hi there. after fitting the supercharger,via a idler pulley and the power steering,on startup,the supercharger was pushing 20lb. I put a bypass for extra boost to return to supercharger inlet. This gave an output of 2-3llbs on idle and 7-8lb on about 4500rpm while engine under load. However when free reving the engine as much as 15+lbs. Ithink this is my mistake because it bent the rings down and cracked the pistons. Currently going to bore the block 60thou and fit some induction pistons with cast iron ring grooves. Iam also going to change the pulley speed to give max 5lb of boost at max revs. I am also going to give the head some work and put mild cam in to give more airflow. Larger exhaust valves.

Image
Image
Image
Image
Image
Image
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

Very nice Zuk Mart :cool:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 24 guests