Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What year HiLux do I want?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

What year HiLux do I want?

Post by pridhac »

Folks,

I am considering changing from my 75series ute to a dual cab HiLux (bub on the way, need more seats) See this post in the 'yota section for more detail http://www.outerlimits4x4.com/viewtopic.php?t=94496

I am very keen to acquire a solid axle Lux, and figured this means I need a pre '97 model.

Alternatively, I have gotten to wondering what the likely cost of SASing a later model Lux would be, that is, a post '97 model.

Any one have any idea, or advice the Lux acquisition idea in general?

Cheers,

Chris
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

LN106 FTW! :D they are the best shape anyways looks wise
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

Get an early '97 should still be solid axle.
Last quote i hear for SAS was $8000
Kind Regards,
Brad
Top
Posts: 478
Joined: Tue Jul 18, 2006 8:43 pm
Location: outer east Melb.

Contact:
Contact MUD EMPIRE

Post by MUD EMPIRE »

LuxyBoy wrote:Get an early '97 should still be solid axle.
Last quote i hear for SAS was $8000
What he said.......early '97.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

You`ll be better off getting an 80 series. You`ll only be wishing you did in a few years anyway. I have one of each and would get rid of my hilux if it didn`t have so much time and money in it. :roll:
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

Guts wrote:You`ll be better off getting an 80 series. You`ll only be wishing you did in a few years anyway. I have one of each and would get rid of my hilux if it didn`t have so much time and money in it. :roll:
A lot of people do say an 80 is the way to go, and I do like my 75 so am tempted to get another 'Cruiser. However, I have two main problems with the idea of an 80. i) There is not ute option (I am not keen on towing) and ii) I am quite reluctant to have a 3 tonne vehicle for an only vehicle. I see no need to push this much weight around all the time, when I suspect a Luxy would do the job, and have a tray :-) 80's have a lot of expensive panels to damage in the bush......

Also, TD 80's have gotten very expensive lately.........

PS What don't you like about your Lux?
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I love mine but I`m just over modding it to make it any good.

First thing that will shit you about a hilux is the lack of power, mines great there now as its V8 :finger:
Top
Posts: 114
Joined: Thu Mar 31, 2005 2:22 pm
Location: Atherton Tablelands QLD

Post by cleanskin »

have you considered a dual cab 80 series? secondhand... im sure you can get one within your budget.
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

Guts wrote:I love mine but I`m just over modding it to make it any good.

First thing that will shit you about a hilux is the lack of power, mines great there now as its V8 :finger:
Coming from a NA 2H powered 75, anything would feel punchy I reckon.........
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

cleanskin wrote:have you considered a dual cab 80 series? secondhand... im sure you can get one within your budget.
Do you mean a chopped/uted 80?

Woulde be interesting I guess, although I haven't seen any.

I understand it costs about $7000 to chop an 80(so I'm told...)

Still a big heavy lump with lots of exxy panels to damage.

I would put a flat tray on Lux. In my current ute, I have whacked lots of trees and rocks with the tray, and it doesn't mind. Were there panels there instead (ala 80s) I think it could get pricey quickly.............

I am struggling to find TD 80's for less than 20K lately too...... 20K + mods is too much wedge for my pocket :cry:
Top
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Post by Zam »

I've got a 91 DC lux with the 2.8d and love it, but the biggest things that sh*ts me is the lack of power, especially on the longer trips.
It's hard to soar like an eagle when you are surrounded by geese.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

This is for sale, PM Dirty Harry if interested, it's his.

Image

Image
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

Post by Hales231271 »

If you don't need a ute for work or tax reasons then do what GUTS has said.
Get an 80 series>

Cheers
Dazza
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

Nah go the LUX they look tuffer :twisted:
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

I am thinking a 93-97 Lux is what I need.

I hear the steering is the weak link in these though.

Can anyone tell me how to improve this and what it's likely to cost?
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

Yeah i broke mine and fitted highsteer :armsup:
Parts = $1200 from http://www.sky-manufacturing.com/
Plus IFS P/S box = $200
Plus fitment = $?????? depends on if you can do it yourself or need someone like Superior or Bubs to fit it
Kind Regards,
Brad
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

LuxyBoy wrote:Yeah i broke mine and fitted highsteer :armsup:
Parts = $1200 from http://www.sky-manufacturing.com/
Plus IFS P/S box = $200
Plus fitment = $?????? depends on if you can do it yourself or need someone like Superior or Bubs to fit it
Holy crap!! That's a fair whack on top buying a lux and lifting it.........


hmmmmmmm........
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 84 guests