Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How does the below pic look for fuel setup.
Std tank - small carb filter - primer pump - vl fuel pump - efi filter - engine
Primer is mounted and doing vl one prob xmas or boxing day slightly higher than where it is now in pic. Hose is like that to primer pump to keep away from shocks and even bends.
Also can i use the large line coming back from charcol canister for a fuel return line and use the old return for canister?
Thanks
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
all i can tell u is that without a surge tank, my pulsar surges when it has less than 1/4 of a tank on high boost, and the set up is basicly identical to to that! so in the HIGH hp zook it shoiuld be apples
on your diagram green return line should go back to surge tank because feeder pump unless same otput as vl pump wont supply enough fuel to surge tank,so unused fuel goes directly back to engine.
MART wrote:on your diagram green return line should go back to surge tank because feeder pump unless same otput as vl pump wont supply enough fuel to surge tank,so unused fuel goes directly back to engine.
Yeah I had that discussion yesterday
Will be running the green line back to the surge tank
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
