Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

really bad steering shake 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

really bad steering shake 80 series

Post by jimbo jones »

I'm stumped my 80 has a really bad steering shake which is really dangerus only started when I put my 4" lift & 315/75/16 (35's) tyre's on and has been doing it more than usual lately

it happens intermittently at varieing speeds generally caused by small bumps in the road and is violent when it happens the steering wheel rips from my hands goes side to side sometimes the only way to stop it is to slam on the brakes and slow right down

to try and stop it I have
fitted a rtc steering dampner
replaced the wheel bearings
& king pin bearings

ive had tyre's rotated, wheel align and wheel balances
nothing has stopped it

If anyone can help me I would really appreciate it
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

I would probably guess it is a caster issue. Double check your panhard first, make sure it is nice and tight, but I would then get the front end looked at, to get the caster back to Toyota specs after the lift.

Jooga
" Some days you are the bug; some days you are the wind screen"
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Caster Jim....you have too much....and need some caster plates. A previous car had thesame problem when lifted too high.
Andrew
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

I have caster plates and the caster is spot on all my bushes, tye rod end's and bearings are spot on as I said I'm stumped
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

hey dow50r you dont live far rekon you could pop round and check it out?
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

a mate of mine said to check the chasie around the steering box as they crack somtimes
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Shouldnt be a problem on a 94...earlier models cracked....but never say never...check the studs on the lower swivel housing to steering relay arms ...r they all tight, none missing?
Common with an 80 aswell ..... then the panhard rod bushes....sometimes a little play there will give you problems.....lastly, jack up and spin the wheels, no eggs off the tyres??? from previous gutter mounting???
Andrew
Posts: 627
Joined: Sun Mar 27, 2005 7:51 pm
Location: Sydney

Post by guzzla »

mine did a very similar thing. solved by tightening front panhard rod bolts, both bolts wound in 3-4 turns by hand b4 putting the socket set on it.
IF IT MOVES, SHOOT IT
IF IT DOESNT, CUT IT DOWN
IF ITS GREEN, PISS ON IT
Posts: 384
Joined: Fri May 14, 2004 8:46 pm
Location: Yeppoon Queensland

Steering Shackes

Post by stinger »

I know the problem very well. I had the same issues and spent months chasing it. Like you new steering dampers, radius arm bushes, tie rod ends, rebuilt king pins, alignments, balances, etc, etc.

Your problem like other have said is likely to be related to your panhard. I changed the top bushes, problem went away instantly. Had a bitch fight with the bottom one and a big thanks to Driveline services at Archerfield, we finally got the bottom one changed after metling the old bush out, griding the head of the bolt and some percusion maintenace (read big hammer). However the death sudders returned. Tighted the bolts up a little more and problem gone. YEAH!!!!!!!!

No more scaring the shit out of the other traffic and any of my passengers.
Stinger,
Locked, lifted, armour plated poverty pack 80 with a hair dryer....
Posts: 22
Joined: Tue Apr 25, 2006 8:56 pm
Location: traralgon vic

Post by bigdee »

I also no this problem very well and spent 6 months trying to fix it at the time i was running 35 claws with external bead locks, i have a five inch lift, the first thing that fixed it was toyota panard bushes then it come back then a rtc dampener which made it worse, i then put the radius arms on top of diff very easy mod and got the castor right without huge castor plates and the tie rod is clearing arms and diff youll no this problem if you've got a reasonable lift, i spent countless hours on outher things but in the end i fitted 2 normal dampeners and made a new panard with a toyota bush one end and a god quality rod end on the other end , i was bit worried how long the rod end was gunna last but its done about 10,000klms so far and have never had the shakes good luck with it
Posts: 57
Joined: Sun Jun 18, 2006 9:13 am
Location: coffs harbour

Post by scotyz »

WHAT SORT OF TYRES ,IF THERE A RAG TYRE THEY TEND TO DO THAT A LOT IF RUNNING PRESSURES LOWER THAN ABOUT 25 PSI
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

scotyz wrote:WHAT SORT OF TYRES ,IF THERE A RAG TYRE THEY TEND TO DO THAT A LOT IF RUNNING PRESSURES LOWER THAN ABOUT 25 PSI
the tyres are cooper st's I have just adjusted the RTC steering dampner and it seems to have gone will post up soon after I do abit of driving see if it rears its ugly head again
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 114
Joined: Thu Mar 31, 2005 2:22 pm
Location: Atherton Tablelands QLD

Post by cleanskin »

it could be a buckeled rim? possibly?
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

cleanskin wrote:it could be a buckeled rim? possibly?
no tyres been balanced
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 294
Joined: Tue Feb 03, 2004 8:59 pm
Location: sydney

tank

Post by MUD80D »

I have a late 95 model 80# and the chasie around the steering box did also crack and i had to weld it then plate it as well.
Take the steering box off and have a look you may even be able to un bolt it with out taking the hoses off.
Reece
toyota 80#,d/cab ute chop,6" springs,20mm body lift, 315/75/16 muds, and 39" michelin XML play tyres , turbo 4.2 1HZ top mount intercooler diesel.now ENGINEERED.
Reece
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Re: tank

Post by jimbo jones »

MUD80D wrote:I have a late 95 model 80# and the chasie around the steering box did also crack and i had to weld it then plate it as well.
Take the steering box off and have a look you may even be able to un bolt it with out taking the hoses off.
Reece
I;m going to take it to pro steer in the new year and get them to check it all out
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

well I found out what it was I was out in the bush lucky it was close to home I drove through a bog hole and heard a clunk when I went to drive a way I had no steering I snaped the eye of the panhard check out the photo's
jimbo

Image
Image
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

Holy shit :shock: :shock: :shock:
Posts: 943
Joined: Sun Aug 24, 2003 2:42 pm
Location: Launceston

Post by Bluey »

oops. one refund coming up then! can you tell if it has been partially broken (ie cracked) for a while or not?
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Much advise above about checking Panhard. Didnt see you acknowledge any.. MAY of been too late !!

Bazzle
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

That certainly was a close clall Jimbo .. imagine if that had of let go at 100 kph. Lucky break (yes yes pun intended) it let go at super slow speeds.

Mate I hate to say it but Bazzle is right, there was plenty of advice above referring to the panhard bushes and maybe a good visual inspection would have identified the problem and prevented it.

Anyway, I guess alls well that ends well so a lesson to us all about checking these things out comprehensively.

Cheers
Simo
TD 80 Series, F&R Lockers, Winch etc
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

I feel slack now for not chasing you around wollongong to check it out....that could have stuffed your christmas up...do u want a longer than std one to fit in the mean time??
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

I would like to thank nelso for welding a new ring on the end of the panard thanks mate :armsup:
Tough dog would not replace it under warranty as I bought it 2nd hand
and I did check the bush on the panards :oops: but the crack must have not been visable at that time just lucky it broke in the bush and not on the road could have been really messy + I had the kids in the car 2
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

hey jimbo you were lucky as was i on my way to sydney from mackay got to putty rd started shuddering limped to narrellen tjm asked darren what he reckoned first thing he said was front panhard the bolt was ready to fall out.i too had my wife and my 9 month d baby
cheers mick
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests