Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

starter motor problems with 1.6 conversion

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

starter motor problems with 1.6 conversion

Post by Daniel »

i have a 1.3 starter at the moment....
i have a conversion (adapter plate) on the gearbox... my 1.3 starter does not fit.. in oder for it to fit i neeed to file or grind away at the block.. i do not want do that.. what can i do?

get a 1.6 starter... or another type of 1.3 starter...

alll i need to start the bastard is a starter.. please help

Dan!
uh huh
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

man which country u from???? just grind ur starter , takes about 2 mins.
buggy time............
Top
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

Post by Daniel »

australia mate... melbourne

ye but can i get another starter to just bolt up....
uh huh
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

Daniel wrote:australia mate... melbourne

ye but can i get another starter to just bolt up....
i tink he was talken bout ur engrish mate :D
Top
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

Post by Daniel »

this is what he asked me

"man which country u from????"

and i said i am from Australia... Melbourne....

where in all of that does it say anything about where my engine might have come from??

Dan!
uh huh
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

:rofl: :rofl: :rofl: :rofl:
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

bazooked wrote:man which country u from???? just grind ur starter , takes about 2 mins.
redzook wrote:
Daniel wrote:australia mate... melbourne

ye but can i get another starter to just bolt up....
i tink he was talken bout ur engrish mate :D
Daniel wrote:this is what he asked me

"man which country u from????"

and i said i am from Australia... Melbourne....

where in all of that does it say anything about where my engine might have come from??

Dan!

:rofl: :rofl: :rofl: :rofl: :rofl:
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

engine? wtf??????????????????
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
buggy time............
Top
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

Post by Daniel »

im tripping out hahahahhahah rofl

so ill just grind the fucka away
it just seems to be alot to ghrind.... i may have a diff starter motor to you though...

will a vitara starter bolt straight up.... with my adapter plate...

Dan!
uh huh
Top
Posts: 193
Joined: Sat Jul 10, 2004 6:11 pm
Location: Sunshine coast Queensland

Post by SLOGQ »

Just grind the starter away dude, takes about 5 min with a 4 inch grinder, take a patch about an inch wide off where it rubs on the block and its all good............
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Do you get it :?: Grind the starter. Not the BLOCK. :roll:
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

Post by Daniel »

ye ye i get it...
starter not block.
cut away the section that it rubs on...
no need to file the block????

Dan!
uh huh
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests