Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Huge idle

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 90
Joined: Wed Nov 22, 2006 3:22 pm

Huge idle

Post by qld zook »

Have just started to put the snorkel on my suzi, but when i started it with just the pod filter in the new fillter box it idles at 3 grand. Any ideas why this would jump up like this.

Cheers
Logan
Lifted and locked vitara
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Anf if you removed the pod it dropped?? again

Bazzle
Top
Posts: 90
Joined: Wed Nov 22, 2006 3:22 pm

Post by qld zook »

yeah if the out the old air box on its all good. with no filter it sits at round 2,500 rpm when the pods on it is around 2,900-3,000. the idle conrtol is wound fully out as well so i dont know (to much air maybe)
Lifted and locked vitara
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Filter wiont make any diff to idle speed if clean, open or not. Must be a linkage stuck or an air thru broken vac hose etc.

Bazzle
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Re: Huge idle

Post by lay80n »

qld zook wrote:Have just started to put the snorkel on my suzi, but when i started it with just the pod filter in the new fillter box it idles at 3 grand. Any ideas why this would jump up like this.

Cheers
Logan

Check the vacum hoses and one way valve that go to the temp sensor for the hot air intake on the top of the air box (thats if it has it). These may have been dislodged or changed when you fitted the snorkel and pod.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 90
Joined: Wed Nov 22, 2006 3:22 pm

Post by qld zook »

the vacume hoses have been plumbed into tho air intake but the one way valve sensor thing is going nowere, as i could not figure out a place to but it. do i need it or can i just leave the the it swinging (is it nessesary).
Lifted and locked vitara
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

qld zook wrote:the vacume hoses have been plumbed into tho air intake but the one way valve sensor thing is going nowere, as i could not figure out a place to but it. do i need it or can i just leave the the it swinging (is it nessesary).
If it's injected i'd say that 'one way valve sensor' is your airflow meter. fairly important...
Tetanus rolling on 37's
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

HI,is it fuel injected. What type,multi or throttle body.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 90
Joined: Wed Nov 22, 2006 3:22 pm

Post by qld zook »

its not injected just a standard 1.6 carbie vit engine. the only hose that i have not connected to any were is a small vacume type hose that was to control the valve that let hot air off the manifod into the engine when warming up, but as i am in qld my engine warms up quick enough as it is so didnt think i would need it.
Lifted and locked vitara
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest