4age engine mounts???how have you done it???

[mushrom11]

just curious on how you guys have made your chassis mounts?haveing real trouble trying to make engine mounts to fit the motor in correctly on the passenger side cant seem to get enough clerance to fit the headers in i have made an adaptor plate for the drivers side moved mounting position forward bout 2inches but engine seems to b pretty high and when connecting the drive shaft from gearbox the motor is on a real big lean as if the engine mounts a to high???in useing the k50 gear box 4speed.

[bazooked]

pm drew of here he is the man for the job and questions.

[v840]

If you dont have an answer by tomorrow night Ill take some pictures of how mine is set up

[zuku26]

Can you take some pics anyway. I'm very interested.

[mushrom11]

i have pm him mate just curious on how u guys have done yours.

[cutzook]

i will take some pics of mine today for you.


cheers joel

[want33s]

[Red_Zook]

if you guys still need to know by next week im picking up my prject zook. it has 4a mounts will take pickes

[mushrom11]

just done myengine mounts.what a blodymission tried makeing daptor plates off zuke mounts but a lot of stuffing around and the motor sat to hi couldnt close bonnet.ended up cutting of zuk mounts and fitted them to suit the 4a motor happy with mounts also had a bit of trouble with gearbox mount to

[want33s]

[mushrom11]

dnt no how to pics mate who nows how to just starting on the wireing side of things now.should b ok as it came out of a zuk.

[sanger]

dnt no how to pics mate who nows how to just starting on the wireing side of things now.should b ok as it came out of a zuk.

First create a photobucket account (just google photobucket and sign up)
Then resize your photos using microsoft photo editor.
Select a photo be clicking on browse and choosing the photo u want.
Then to upload photo click upload

The copy and paste the bottom IMG code into your post.

Hope this helps

[mushrom11]

http://i125.photobucket.com/albums/p80/ ... 006587.jpg http://i125.photobucket.com/albums/p80/ ... 006591.jpg

[mushrom11]

http://i125.photobucket.com/albums/p80/ ... 006592.jpg
http://i125.photobucket.com/albums/p80/ ... 006589.jpg
http://i125.photobucket.com/albums/p80/ ... 006590.jpg


cool now no how to post pics.1st time welding so dont laugh just tak welded as have to get a certified welder to do mounts top get on road.the last pic is what it looked like before i rolled it. now got a totally diffrent soft top body in rough condition but there rear as hens teeth to find soft tops in nz so am happy. truck also has 50mm wheel spacers on it.sorry didnt take photo of gear box mount

http://i125.photobucket.com/albums/p80/ ... 006590.jpg
http://i125.photobucket.com/albums/p80/ ... 006577.jpg
http://i125.photobucket.com/albums/p80/ ... 006017.jpg

[Drew]

replyed to pms ,just noticed the thread,
i haven't been on the computer much lately,busy at the new job.

modify the headers to suit , i have made some custom ones before but no longer have access to the equipment .

looking at your pics the eng mounting is fine plenty low enough.
you might want to rethink using a k40 gearbox, i don't think it will be strong enough,go for a t50.

mount your gearbox so that the output faces straght at the t/case input then get the shaft shortend to suit if it is not lined up well it will vibrate

[Drew]

sorry cant find any pics of mine at the moment.

broke the t50
its in pieces now getting a hilux gearbox & t/case.
more of a pain than the original conversion.
the only decent bellhousing comes from NZ, i have had to wait for a new batch to be made .
hopefully its on its way
cheers Drew

[Red_Zook]

now you dont have to go in to them all

[zuku26]

From the research I've done on this swap, If you have the earlier slightly less powerful motor You can run the K50 tranny which is the one with the cable feed clutch. With the later more powerful motor you might want to to with the t-50 (hydraulic clutch) but a k-50 will last ok. If your running the 4agze motor or any serious modifications to the 4age motor the T-50 is a must. Converting to hydraulic is another task all in it's own.
I had some pms sent to me a while back. I post them on a thread. search my posts. And tell us more about wiring as well. I would love to run the 4agze motor in my zook. I going to do a swift gt swap first since it's going to be my first swap. Then after I get the feel of motor swapping. I'll tackle a bigger swap like the 4agze or rotary.

[mushrom11]

yea mate i think i have the k40 4sp in it at the moment i aint a guru but its 4speed and it has a slave cylinder cant b botherd hooking up a slave cylinder so on the look out for a k50 that will bolt on to the 4age.to my under standing the t-vis version which i have has just about or more low down torque than the 100kw version at lower revs.but the wireing for my zuke was already done for me as it originaly came out of a zuke

[Rotazuk]

If you have a slave cylinder then you have a T-40 box . The K boxes are cable operated . Itis possible to fit a master cylinder on the firewall . My diesel zuk had a t-50 box in it . It handled the torque of the diesel ok .

Chris

[mushrom11]

If you have a slave cylinder then you have a T-40 box . The K boxes are cable operated . Itis possible to fit a master cylinder on the firewall . My diesel zuk had a t-50 box in it . It handled the torque of the diesel ok .

Chris

yea i no rotazuk the red one a????im based in nz aswell so its a t40 cant b bothared putting a slavr cylinder in as i need a 5th gear as im running a reduction t/case aswell on the look out on trade me for a k50 5sp off a 3a.gt a k50 5speed hea at the moment but got the wrong houseing to bolt to motor