Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

injectors

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 231
Joined: Mon Dec 20, 2004 9:43 am
Location: lost in my pile of parts

injectors

Post by Tim D »

what is meant by high or low impedance injectors,can either be run on a haltech e6x?
the engine is a 3.5L rover V8 with a powerdyne supercharger.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

It is the resistance of the winding. Some are low resistance some high. Cant remember but maybe 20 ohm and 100ohms??

Bazzle
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

What he said..
High impedence injectors have a higher resistance. The difference is the current draw of the injector. If your ECU is designed to run high impedence injectors and you drive low ones with it then you'll generally fry the transistors in the ECU that drive the injectors. An E6X haltech will run either without a problem as long as you're only running 8.
Cheers, Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 141
Joined: Sun Jan 16, 2005 7:22 pm
Location: Gold Coast,Tweed

Post by THE 109 »

thanks heaps guys ;)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests