Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine keeps running

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 729
Joined: Sat Aug 07, 2004 11:42 pm
Location: Maitland

Engine keeps running

Post by revin »

I have a 95,Hilux the powerful 2.8D :D .Seems to have a small problem at present. Over the last couple of weeks when I pull up in the drive way,turn car off,get the keys outif the ignition and open up the shed,start car again,drive into shed.WhenI go to turn the car off again it keeps running.The radio turns off (can hear the revs drop a little) but she keeps running.I have to turn key on/off a few times to get it to stop or stall the car.

Could this be as simple as a faulty ignition,or could I be looking at something a lot worse.

If its ignition,where is a good spot to get a new barrel from a long with new door locks (I like having 1 key to unlock the lot)

Thanks
2001 100 series stock as a rock
Posts: 35
Joined: Thu Jan 04, 2007 3:30 pm
Location: Hamilton

Post by Relapse »

This happens in petrol motors as a result of carbon build up in the cylinders and can be rectified with running premium unleaded with carbon cleaner mixed in the tank.

Diesel motors i'm not too sure about... perhaps a similar problem?
Posts: 505
Joined: Wed Jan 25, 2006 9:19 am
Location: to the left of the post

Post by trains »

I would be looking at the idle stop solenoid which is found at the top of the rear part of the injector pump. Just look for that rubber dust cover with a wire coming out of it above the 4 injector pipes, but under the mixture adjustment screw.

It sounds exactly what ive come across before, as you can start it ok, so the solenoid is working, its just that it wont stop when you want it to.

Remove wiring, remove rubber dust cover, blow out area with air to remove dirt etc, undo with spanner and check the following.

A that the spring for the plunger is still alive that pushes down to stop the fuel flow when the key is off.

That the rubber end of the plunger is not damaged, or that there is no foreign material under it that would stop it from sealing.

Also check the filter there too, be carefull, its pretty delicate.

Mates hilux 2.2 L motor had serious running on probs, took out the idle stop, and it didnt have a plunger spring. when it was turned off, gravity just allowed it to drop over the port and stop it, but mostly it wouldnt seat, and thus leak fuel into the port, and the engine continued to run.

Got one of those 4 colour pens, as the springs are just the right diam, and cut to length, worked a treat.

Ps dont forget to go to a diesel shop, and get a new o ring, as the old one will most likely leak if you try and use it again.

Let us know what you find.

Trains
Save the Whales......Collect the whole set.


My Wife Can't Shear..............But You Should See Her Crutch !
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

most likly its the soleniod, however there is one werid thing that sometimes happens. if the motor is overfilled with oil they can throw enough through the breather to keep the motor running.
Posts: 729
Joined: Sat Aug 07, 2004 11:42 pm
Location: Maitland

Post by revin »

Thanks Trains will have a look at what your suggested in a couple of weeks when Im off work again. {Bloody thing has done it now for a few days :bad-words: }

tweak'e:The engine isnt over full of oil.I keep it about 1mm below full but thanks for the suggestion.

Talked with me old man last night and he to thinks its the solenoid
2001 100 series stock as a rock
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest