hi guys,
im after a half cut for the 1.6 16v efi vitara!
first question is the engine number? is it definatley the G16B?
Secondly could any1 that knows the websites for people that supply these halfcuts in aus please post em up. im located in perth but dont mind freighting items interstate if need be.
your help will be appreciated,
thanks
CW
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
g16b half cut
Cool, another perthie doing the conversion.
Justjap in syd is where i got mine. cost about 1600 + 500ish for freighting with northline door-door.
Engine no. usually is a G16A but still mpfi 16v. Jap imports are slightly different for this.
nic
Justjap in syd is where i got mine. cost about 1600 + 500ish for freighting with northline door-door.
Engine no. usually is a G16A but still mpfi 16v. Jap imports are slightly different for this.
nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
just buy this thing, it has the mod plate and all and is cheap. lol http://cgi.ebay.com.au/V8-suzuki-sierra ... dZViewItem
hey nic, will look into justjap. Do you know their website or phone number?nicbeer wrote:Cool, another perthie doing the conversion.
Justjap in syd is where i got mine. cost about 1600 + 500ish for freighting with northline door-door.
Engine no. usually is a G16A but still mpfi 16v. Jap imports are slightly different for this.
nic
did u do a gearbox conversion as well? or just hooked him up to the 5 speed? u being in perth also would mean that u could help me do the conversion for small fee wouldn't it????
hehe
as for that v8, it does look fun but not really good for wat i wanna do! but man for $2500 it is tempting! lol
Last edited by croatian4x4 on Sat Jan 13, 2007 10:13 am, edited 1 time in total.
I KNOW! i would buy it, but it defetes the purpose of have a light wieght 4x4, the v8 would make it way to heavy at the front. But Fark i think its cheap with a mod plate and all! would be fun to buy and drive to work and back. Do big line lockers and everyone would look at you like WHAT THE HELL 
apart from you would snap a axle every week. lol
apart from you would snap a axle every week. lol
Just jap are out of stock ATM
There is two comming but I have first dibs
On Monday I should be post more details on availability
Check me EOI thread and register your support
cheers
Wayne
There is two comming but I have first dibs
On Monday I should be post more details on availability
Check me EOI thread and register your support
cheers
Wayne
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Hey,croatian4x4 wrote:hey nic, will look into justjap. Do you know their website or phone number?nicbeer wrote:Cool, another perthie doing the conversion.
Justjap in syd is where i got mine. cost about 1600 + 500ish for freighting with northline door-door.
Engine no. usually is a G16A but still mpfi 16v. Jap imports are slightly different for this.
nic
did u do a gearbox conversion as well? or just hooked him up to the 5 speed? u being in perth also would mean that u could help me do the conversion for small fee wouldn't it????
hehe
as for that v8, it does look fun but not really good for wat i wanna do! but man for $2500 it is tempting! lol
Yep should be able to help out where i can with the conversion.
I got the gbox adapter from BenT on the forum. inc engine mount adapter as well.
http://www.justjap.com.au/aboutus.html
I am in wanneroo if you want to see what all it looks like.
Also check my build thread from below.
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
thanks mate i might take you up on that offer!
i live down in bertram/kwinanna area but i dont mind going for a drive every now and then so i will come and have a look when i eventually get time off!
also any of you boys or girls over here in perth know of any1 that rents out power shed sites???? i know its a long shot but i literrally have no room, carport or yard wise to do anything atm :( :(
sorry 1 more thing, any1 done this conversion usuing the auto box? just curious as it would be easier going offroad ith an auto behind it me thinks....? thoughts??
cheers,
CW
i live down in bertram/kwinanna area but i dont mind going for a drive every now and then so i will come and have a look when i eventually get time off!
also any of you boys or girls over here in perth know of any1 that rents out power shed sites???? i know its a long shot but i literrally have no room, carport or yard wise to do anything atm :( :(
sorry 1 more thing, any1 done this conversion usuing the auto box? just curious as it would be easier going offroad ith an auto behind it me thinks....? thoughts??
cheers,
CW
bartlettmoto wrote:just buy this thing, it has the mod plate and all and is cheap. lol http://cgi.ebay.com.au/V8-suzuki-sierra ... dZViewItem
I was thinking about it, but it would be a headache to get rego'ed in another State/territory….
No worries, mines getting done in my carport. can fit 4 cars there so got just enought space.croatian4x4 wrote:thanks mate i might take you up on that offer!
i live down in bertram/kwinanna area but i dont mind going for a drive every now and then so i will come and have a look when i eventually get time off!
also any of you boys or girls over here in perth know of any1 that rents out power shed sites???? i know its a long shot but i literrally have no room, carport or yard wise to do anything atm :( :(
sorry 1 more thing, any1 done this conversion usuing the auto box? just curious as it would be easier going offroad ith an auto behind it me thinks....? thoughts??
cheers,
CW
The autos are quite big when looking at them and would have to get gears for it i am guessing.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Isn't the transfer attached to the gearbox in Vitaras
I think you might run into rear drive shaft issues (too short or too steep)
I think you might run into rear drive shaft issues (too short or too steep)
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Who is online
Users browsing this forum: No registered users and 2 guests