Does anyone in Perth fabricate roll cages?

[dirt]

Hi All,

I'm trying to find someone in Perth to fabricate a roll cage for my FJ40. It's proving harder than I thought as most people only make the aluminium roll bars which are for show more than protection. A guy at Alloy Performance Racing in Osbourne Park has said he can do it but from the conversation he seemed more geared to making aluminium roll bars. Depending on cost I'd prefer a six point cage that has supports around the front screen as well as the hoop behind your head.

Anyone any ideas?

Cheers, Phil

[RockyF75]

Yellowpages search for metal fabrication shops/ sheetmetal joints. Ring around and ask.

[nicbeer]

Go to go gear or revolution racegear.

These are the legal cams aproved ones.

Nic

[DanielS]

hey dirt,

as nicbear said these guys both carry cold draw steel, but I didnt know they built cages.
from memory there is a shop in morley that does them 2. I ended up buying the tubing and bending it up myself (saved heaps).

PS did you ask the guys at avon 4wd center about this a while ago??

Regards

Daniels

[weeman]

Hi All,

I'm trying to find someone in Perth to fabricate a roll cage for my FJ40. It's proving harder than I thought as most people only make the aluminium roll bars which are for show more than protection. A guy at Alloy Performance Racing in Osbourne Park has said he can do it but from the conversation he seemed more geared to making aluminium roll bars. Depending on cost I'd prefer a six point cage that has supports around the front screen as well as the hoop behind your head.

Anyone any ideas?

Cheers, Phil

Speak to cass Jones he does alot of compt trucks around australia and his situated in perth his business is called climax industries if you cant find his number pm me and i'll get it. But he can build a 6pt cage not a problem has done many.

[dirt]

Yellowpages search for metal fabrication shops/ sheetmetal joints. Ring around and ask.

Tried the yellow pages gig for ages but no takers. With all the mining there are hundreds of fabricators but I guess there's too much money doing other stuff at the moment. I don't remember asking avon 4wd but I've asked loads of people so it could have been me.

Thanks Nicbeer, I'll give the companies you mention a call tomorrow to see what they say.

I'll also try Cass Jones if I can find him (not in WP or YP)

Thanks for the advice, I'll let you know how I go. Someone I know mentioned $4k so if it's going to be this much I might consider getting a tube bender and teaching myself.

Cheers, Phil

[Tazz]

Try Russell Cullen @ Opposite Lock, Balcatta..

If they wont do it he would know who will.

[bazooked]

if ya want cass jones number pm me and i will give it to u.

[steel]

BendTech :94598600 Idlewild offroad racing :92486557