Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

shackles

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 8
Joined: Thu Jan 04, 2007 7:39 pm
Location: QLD

shackles

Post by reeceole »

whats involved in putting 1" extended shackles in sierra 94 model?
is there much time in doing it.

also found some rims :!: f150 offset. cant remember what offset he said they were do you reckon they wud fit straight on without problems? have two inch suspension lift.
380$$ whith tires basicly bran new. dont know much on price so does the price sound right?? :armsup:
Posts: 391
Joined: Tue Oct 26, 2004 6:50 pm
Location: brissy

extended shackels

Post by benjamin78au »

as a basic vechile, you are aware extended shackles are illegal, in qld as far as i am aware, if you elese wher ein oz check local rules.

The thing to check are brake lines, the drive shaft still line up okay, you have enought travel in shocks, so they dont bottom out.

think that is about it. others will give their 2 cents.

easy to make , 2 bits of bar.
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

I have a 86 narrow track with 2 " spring and 1" extended shackles( really 2 inch exted but only lifts the car an inch1) and ever thing still go's well!

$10 and an hour is all it takes!

After you have made them all you have to do is take the old ones out and then bolt the new one's in! 1 bolt at the top one bolt at the bottom and your in bussines!

There is another thread at the moment on extended shackles you might want to check that out!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 8
Joined: Thu Jan 04, 2007 7:39 pm
Location: QLD

Post by reeceole »

so thats all it takes. simple!
you dont need to jack the viechle up or anything?

yeh ive been through that other thread.
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

reeceole wrote:so thats all it takes. simple!
you dont need to jack the viechle up or anything?

yeh ive been through that other thread.

Not meaning to offend you here, but if you have to ask this, you better not try it your self, get some mates, your dad or maybe a shop to help out.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

may also want to check the f150 rims also as i dont think they came in 5 stud with right centre size hole but never know.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

There are deffinatly some f150 rims that fit! It's not a one person job to put extended shackles on! You need to jack the spring back into place and line the holes for the bolts up! It's a 2 person job for sure!

BUT when you have done the first one it's easy as! :cool:
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

suzuki boy wrote:There are deffinatly some f150 rims that fit! It's not a one person job to put extended shackles on! You need to jack the spring back into place and line the holes for the bolts up! It's a 2 person job for sure!

BUT when you have done the first one it's easy as! :cool:
What The???

I just jack up the vehicle untill there's not weight on the springs and remove the old shackles then just adjust the height until it matches the new shackles. All up all 4 shackles replaced in about 30min including a couple of beers. Do it while the Misses watches Neighbours or something pointless.
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

MY shackles were pretty tight and the bushes were new if that makes a difference!

It's alright it's done now!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 8
Joined: Thu Jan 04, 2007 7:39 pm
Location: QLD

shackles

Post by reeceole »

oi ( )
/ /
/ /
/ /
( )( )
sucker. my dads dead.
if you dont know anything about it dont f** n type anything.
what are u a f***n shrink or somthin?? :finger:

thankyou for the info everyone else.
helpd alot.
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Re: shackles

Post by droopypete »

reeceole wrote:oi ( )
/ /
/ /
/ /
( )( )
sucker. my dads dead.
if you dont know anything about it dont f** n type anything.
what are u a f***n shrink or somthin?? :finger:

thankyou for the info everyone else.
helpd alot.
I can only assume this was directed at me.

firstly, sorry to here about your dad (sincerly)

and secondly I know a shit load about shackles on zooks, more than enough to get worried when I saw this jem,

so thats all it takes. simple!
you dont need to jack the viechle up or anything?"


you asked us for advice we gave it,
as I said I had no intention of offending you, I was only concerned for your safety, sorry I cared.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Reeceole,

Just take it easy, Pete was simply reading your post and assumed that you may not have the mechanical knowledge to do this job SAFELY on your own.

Everyone has to learn somehow and you're better off taking advice of people with the expirence.

BTW Pete has a little bit of expirence with zooks. :lol: and is not just a web wheeler.

James.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

:D
Last edited by want33s on Mon Dec 17, 2007 10:55 pm, edited 1 time in total.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

reeceole when you respond like you did it makes it very hard for people to help you down the track when you ask other questions. Listen when people give you sound advice and don't come back by calling people c*ck suckers when they do give you advice. If you don't like the advice just don't use it
Ransom note = demand + collage
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

Post by noelb1 »

nicbeer wrote:may also want to check the f150 rims also as i dont think they came in 5 stud with right centre size hole but never know.
f150 rims are 5stud and do fit zooks and have a good offset! but cj5 rims give an even bigger offset
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Re: shackles

Post by suzuki boy »

reeceole wrote:oi ( )
/ /
/ /
/ /
( )( )
sucker. my dads dead.
if you dont know anything about it dont f** n type anything.
what are u a f***n shrink or somthin?? :finger:

thankyou for the info everyone else.
helpd alot.
Not extreme or any thing! :shock:
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 763
Joined: Wed Jun 16, 2004 3:58 pm
Location: Victoria, Australia

Post by vicelore »

lol funny shit.
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.

[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests