Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What size tyres can we fit

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

What size tyres can we fit

Post by 88pajero »

My brother inlaw has a stock 2002 model sr5 lux and he wants to put 32s under it. I was confident that he can but want some confirmation first. Will they fit under stock or will we need to do a 1-2in body lift?
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Tell him they will. If they hit he has to lift the cab at the end of the day it might cost a bit more to do the lift But then he's got 32's on it and should be happy :) and most likely thank you for pushing him into doing it. :armsup:
plenty of parts on the bench
Top
Posts: 1574
Joined: Tue Mar 21, 2006 7:34 am
Location: Greenbank - Home of the web wheelers

Post by booflux »

You will need minmum 2" body lift.
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Top
Posts: 17
Joined: Thu Feb 23, 2006 11:59 am
Location: Bunyip, VIC

Post by blackpak »

I run 265/75/16 (31.73 inches) cooper ST's on my 01 lux with 2" lift in the back and the torsion bars wound up in the front about 1" 1/2 and it only just scrubs when I've got full compression and full lock at the same time.
Top
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Post by 88pajero »

We have decided to go with the body lift so that we avoid all probs. Just one question about the body lift, do we use the same bodyblocks for the tray as we do the the body or are there some different ones to use? He uses the canopy at all times so he would like the canopy to remain flush with the roof.
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

I'd just use steel box section the same hight on it's side as the body lift beats forking out for extra blocks when it''s probablty cost less than half to use box say cab lift is 2inch use 50x50 box if you want to add strenght cap both ends of it mine never were and didn't bend
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest