Page 5 of 5
Posted: Sat Dec 26, 2009 11:07 pm
by Suspension Stuff
(EST)MahviaDeTyrk wrote:Suspension Stuff wrote:(EST)MahviaDeTyrk wrote:Is Dobinsons coils standart for GQ with TD42 ?? or what engine ??
See if they have C45-304 or C45-308 for the front. These are softer coils which would be more suitable if your vehicle is lighter then the GQ.
Dobinsons may supply C45-270 (A 4" lift coil) but they won't have them in stock in your neighbouring country. These coils are usually too soft for a GQ Patrol and may sag but if you are lighter they may work well The rear eqivalent is C45-271.
Thaanks for that
C45-304 and C45-308 free lenght = ?
C45-270 free lenght = ?
GQ SWB with TD42 weight is ??? in front and rear % ??
GQ SWB with RD28 weight is ??? in front and rear % ??
GQ LWB with TD42 weight is ??? in front and rear % ??
GQ LWB with RD28 weight is ??? in front and rear % ??
These are all front coils.
C45-308 480/460 9t 17mm wir 225 Lbs
C45-270V 17mm 10.75 540/520mm (This is a tapered coil. The top few turns have been ground back to thinner wire)
C45-304 17mm 9T 460/440 225pounds
Someone else can help you with vehicle weights.
Shane
Posted: Sun Dec 27, 2009 12:21 am
by (EST)MahviaDeTyrk
Suspension Stuff wrote:
These are all front coils.
C45-308 480/460 9t 17mm wir 225 Lbs
C45-270V 17mm 10.75 540/520mm (This is a tapered coil. The top few turns have been ground back to thinner wire)
C45-304 17mm 9T 460/440 225pounds
Shane
Nice - Thaanks
Suspension Stuff wrote:These are softer coils which would be more suitable if your vehicle is lighter then the GQ.
Are they too soft for GQ with TD42 ?? (with winch and bullbar ?)
Please something soft and long for rear too
Suspension Stuff wrote: The rear eqivalent is C45-271.
Like I undestand V means Variable rate - is C45-271V available ?
Dimensions ?
Posted: Sun Dec 27, 2009 9:30 am
by Suspension Stuff
I have some in my shop but I doubt your local supplier will have them but they could get them.
Yes those front coils are generally too soft for a LWB.
C45-271 19mm 10T 580/560. Too soft for a LWB in my opinion. I recommend 20mm wire but Dobinsons don't have them heavier.
C45-129 2.5” lift rear 490/470 19mm 282lbs 8T
Posted: Wed Feb 03, 2010 7:15 pm
by benny4x4
Suspension Stuff wrote:I have some in my shop but I doubt your local supplier will have them but they could get them.
Yes those front coils are generally too soft for a LWB.
C45-271 19mm 10T 580/560. Too soft for a LWB in my opinion. I recommend 20mm wire but Dobinsons don't have them heavier.
C45-129 2.5” lift rear 490/470 19mm 282lbs 8T
Hi Shane, Ben here. Have you found out about those EFS Extreme shocks for my 4"lift, Exchanging FROM the boss that we discussed over the phone
Posted: Wed Feb 03, 2010 7:15 pm
by benny4x4
Suspension Stuff wrote:I have some in my shop but I doubt your local supplier will have them but they could get them.
Yes those front coils are generally too soft for a LWB.
C45-271 19mm 10T 580/560. Too soft for a LWB in my opinion. I recommend 20mm wire but Dobinsons don't have them heavier.
C45-129 2.5” lift rear 490/470 19mm 282lbs 8T
Hi Shane, Ben here. Have you found out about those EFS Extreme shocks for my 4"lift, Exchanging FROM the boss that we discussed over the phone
Posted: Wed Feb 03, 2010 7:27 pm
by Suspension Stuff
benny4x4 wrote:Suspension Stuff wrote:I have some in my shop but I doubt your local supplier will have them but they could get them.
Yes those front coils are generally too soft for a LWB.
C45-271 19mm 10T 580/560. Too soft for a LWB in my opinion. I recommend 20mm wire but Dobinsons don't have them heavier.
C45-129 2.5” lift rear 490/470 19mm 282lbs 8T
Hi Shane, Ben here. Have you found out about those EFS Extreme shocks for my 4"lift, Exchanging FROM the boss that we discussed over the phone
They came in today, however this should be in a private message. This thread is about flexy coils.