Outer Limits 4x4 Board

ignition coil (tb42e) - 22433 53F00

Bosch ignition coil - BIC410 (heaps cheaper)

fuel pressure regulator (tb42e) - 2267037J00

Anyone know of an aftermarket or alternative regulator as Nissan very exy.

Anybody got the part number for the plastic gear shift stick bushing? Mine is worn. Thx John

PLASTIC GEAR LEVER BUSH 32861-01G00

my boss sells them on ebay you can have a look
cheers
andy

Thanks Andy. I also see you guys sell OEM turn indictors on your home page (not on ebay). Do you know if these are the ones that are e-coded or JIS coded. The ones on my Safari are e coded. I am going to need to replace my lefthand front indicator so it will pass rego. But it has to either be imprinted on the lense with a e-code (Europe), JIS code (Japan), DOT code (USA) or SAE (Canada). All the ones I saw on ebay are aftermarket and the sellers say they have no certification stamped on the lense or housing. BTW, can I buy on your home page using Pay Pal or VISA?
Cheers, John

hi, can someone look up the y61 front axle - drive flange. NOT the one for the pinion. It is a factory option instead of manual locking hubs or auto hubs.

thanks greg

SWB flexible wire that allows the passenger seat to tilt forward then slide forward. Also thumb screws to lock the shade into place on the sunroof, the shade is no longer available but the screws are. I will just have to make my own shade.

Description

Wire-Flexible 87553-04J10 $43.70

Lock-shade 73955-40F60 approx $4.25 ea comes in a pack of 2

1MadEngineer wrote:hi, can someone look up the y61 front axle - drive flange. NOT the one for the pinion. It is a factory option instead of manual locking hubs or auto hubs.

thanks greg

no one find them??
surely bogged or linc!! (calling in the big guns)

1MadEngineer wrote:

1MadEngineer wrote:hi, can someone look up the y61 front axle - drive flange. NOT the one for the pinion. It is a factory option instead of manual locking hubs or auto hubs.

thanks greg

no one find them??
surely bogged or linc!! (calling in the big guns)

I've never seen one, are you sure they were a factory option.

mickyd555 wrote:

1MadEngineer wrote:

1MadEngineer wrote:hi, can someone look up the y61 front axle - drive flange. NOT the one for the pinion. It is a factory option instead of manual locking hubs or auto hubs.

thanks greg

no one find them??
surely bogged or linc!! (calling in the big guns)

I've never seen one, are you sure they were a factory option.

x3ty

shows the 3 options, auto / manual / fixed (drive flange)

Drive flange 40261-01j00

SHIFTY wrote:Drive flange 40261-01j00

thats awesome!! another quick Q, is this item used on any other model ??

King pin caps for a GU Patrol ?

Wanted part number and price.

Dave.

king pin caps 40022-01j00 $105 ea

drive flange is used only gq/gu
mq and g60 are different

SHIFTY wrote:drive flange is used only gq/gu
mq and g60 are different

just checking the part# is not the PINION flange is it?

It is the front hub drive flange (what you have pictured) bolts on in place of either auto or man hub and takes a grease cap over the top.

SHIFTY wrote:It is the front hub drive flange (what you have pictured) bolts on in place of either auto or man hub and takes a grease cap over the top.

thanks mate your a legend

btt

anything new to add?

PTO Shear Pin - N3377101J00 (NZD$25.00)
Shear Pin - Split Pin N0092121510 (NZD$0.70)

early TD42

TD42 gasket Sump gasket 11121-06J04 $88
TD42 seal Rear main crankshaft seal 12279-43G02 $57
TD42 seal Front crankshaft seal 13510-43G01 $24
TD42 oil hose Alternator oil pressure hose 14665-43G0A $58
TD42 oil hose Alternator oil return hose $40
TD42 gasket Tacho gasket on timing cover 13039-34N00 $7
TD42 oring seal Timing cover water seal oring 14465-43G20 $11.5
TD42oring seal Timing cover water seal oring 14465-43G21 $11.5
Boot Gear lever rubber boot on top of gearbox 32862-V5001 $18
Boot Clutch fork boot on bellhousing 30542-01J00 $17
Bush Gear lever lower bushing (lower end) 32861-01G00 $12
Seat bushing Gear lever seat bushing ( pivot ball) 32855-V5000 $10
Clutch fork Clutch fork lever 30531-01J00 $105
Clutch pivot Clutch pivot pin and ball 30537-01T00 $19
Clutch sleeve Clutch release bearing mounting sleeve 30501-01J60 $40
Spring retainer Clutch fork spring retainer 30534-01T01 $4
Spring holder Clutch release bearing spring holder 3051401T0A $4
Seal Rear pinion seal (1995 model) NEED TO CHECK F or R 38189-C7123 29
Seal Front pinion seal ( 1995 model) NEED TO CHECK F or R 38189-C7122 29

Gearbox bearings, seals and gaskets for a 1989 5 speed GQ PATROL

KOYO RP455236A NEEDLE ROLLER
2 X NTN KJ55X61X33X2S NEEDLE ROLLERS
NACHI 6310ZNR BALL BEARING
NSK 40TMO6NRC3** UMML 704 BALL BEARING
NSK NUP307E-A-1WNR*C3*01*704 ROLLER BEARING
KOYO 6207C3 BALL BEARING
NSK NJ2207WC3*803 ROLLER BEARING

PLUS 5 OTHER NEEDLE ROLLERS NOT IDENTIFIABLE
APPROXIMATE SIZES –
40MM X OD-60MM ID-55MM DOUBLE ROW NEEDLE ROLLER (2MM DIA)
29MM X OD-43MM ID-32MM SINGLE ROW LARGE ROLLERS (6MM DIA)
44MM X OD-44MM ID-40MM DOUBLE ROW NEEDLE ROLLER (2MM DIA)
(2 OFF) 23MM X OD-33MM ID-27MM SINGLE ROW NEEDLE ROLLER (4MM DIA)


OEM GASKET AND SEAL KIT FOR GEARBOX & TRANSFER 32162-01J25

INDIVIDUAL ITEMS IN KIT:
32112-01J00 Gasket – front cover
32129-01T00 Packing – PTO cover
32129-01T01 Gasket – housing cover
32136-01J00 Oil seal – overdrive gear case
32162-01T00 Gasket - shift housing
32194-01T00 Gasket – OD gearcase
32219-Z5004 Oil seal – front cover
32516-01J0? (last digit may be an 0 – rubbed off) Gasket – top cover
32858-01J00 Oil seal – shift cover
33111-01J00 Oil seal – transfer cover
33142-01J01 Oil seal – transfer case
33185-C6200 Oil seal – shift shaft
33216-01J00 Oil seal – transfer case

Any chance that someone still has one of them cd's kickin around???
Or can anyone give me the part no's for the dizzy cap & rotor button ???
Thanks guys