Outer Limits 4x4 Board

heres mine in its latest state.

Added pics

The bitch is back on the road - just

White 96 coily SWB soft top - I've owned it since 2000
First and only sierra I have ever owned, but I think it came with some basic mods when I got it:

A small body or suspension lift
Bullbar
Rollbar
extractors and exhaust to suit
Wider tires
Tow bar
inside all panels seriously fishoiled

Here's what I have done with it (mostly cosmetic/functional for a bush basher):

It came with the original soft top, which has slowly shit itself over the years so first off I added some straps to the sides flap with press studs so I could roll them up like the rear- worked OK out bush but had a nasty habit of unclipping and flapping around at 115km/h on the M5. The harsh FNQ sun f***ed em up more so I cut em off to make a safari top. The bar thingy that tensions the soft top gave me an idea so I set it up at the lowest possible angle making a semi-fastback with no sides. I reckon it looks cool.

Painted the bonnet and standard flares matt black

Added a jerrycan holder to the tailgate - fits perfectly

Added a nylon webbing jerrycan holder to the inside of the tailgate - now disassembled

Got another spare wheel bracket from a mate of mine. Bolted it on top of the existing one but facing inwards (only fastened with two bolts but so far works OK on the dirt - currently disassembled)

Blew up an engine a while ago so fitted a donk from an earlier model sierra (all I could get for under 5 hungy)

Removed the rear seats and fitted in an ex-army spacecase (thinner than the usual military footlocker one) and two 20mm ammo cans for all the useless shit I carry around - currently disassembled

Here's what I plan to do to it in the near future:

I have two doors waiting for the loving attention of the angle grinder and pop rivet gun (half doors)

Replace the seats

A mate of mine who owns a WWII Ford GPW jeep is respraying it - I asked him to add 6lt of US WWII spec Olive Drab paint to his order - the zook will then be a lovely shade of puppy-puke olive drab (OG-107 I think)

Have a custom built canvas canopy and seat covers built for it out of Olive Drab canvas

31 inch tyres

virtual lift

Jeep flares

Snorkel

Eventually, a G16 donk when this one bites the dust.

That's about all I plan to do to it - it's proven itself to be a highly capable little beast as it is now.

Then... onto the trailer - based on the WWII jeep trailer, but not quite so ... vintage looking

Pics - old pre-blown donk pics because my camera's not working







What I've been driving around for the past 12 months - 1995 Sierra with replica Willys jeep body sporting real WWII jeep hardware (windscreen, mirrors, etc)

few new pics, put on shakles i made myself and changed a few spotties around. just tried to tidy her up abit so it can be sold.

I think i may have finally worked out this pic posting thing.
So here it is.....
82 chassis
94 body
Spoa
1L of pure grunt.

To do......
Rebuild from ground up really
2 inch ext shackles
snorkel
extractors
bullbar
rollbar
try to figure out how to put wiring harness back together
and somehow find a way to put a 350 into it. lol.

my lil zook...
82ish
2inch shackels
assulted guards
32' mongrels
1.6 4g32 galant motor and 4 spd box
ummm
ute chop...
thats about it!!!

Here's my Big Zook

Enginered by "The Shnook"

Hi Folks and regards,


Singapore -Suzuki Jimny JB43 1300cc running on 31"x10.5x15Extreme Trekker,custom 6"steelies with -35offset,manual locking hubs to rid off all unnecessary vaccuum hoses along the front axle,uprated 5DR vitara's front disc brakes,
DG Tuning heavy duty front trailing arms,Kayaba heavyduty long-travel shocks front/rear for 5inch lift,40mm delrin body lift,DG tuning heavy duty transfer case mounting,SJ410 transfer case for regearing,all diff breathers hanging higher up,
custom fab front tube bumper with a M6000 Warn with plasma rope sitting snugly,x2-450 Hellas,rock sliders and rear tube bumper all custom fab and coated 'olive' bronze.Rear diff ez-locker for traction.Taniguchi lateral rod correction bracket,FTS adjustable lateral rods F/R,Suzuki steering damper, Sparco Sprint buckets with Takata 4-point harness.
OBit EMS for fuel tuning and ignition timing control,Delfi racing gauges-Oil press,water temp,oil temp,A/F ratio digital gauge,Apex-i SAFC for monitoring purpose,Sard Racing fuel regulator,K&N filter with DIY stainless/steel snorkel.

















Samuraijimny413-Singapore

Niiiiiiiiiiiiice, looks like you're having fun

'92 Van we put together for my girlfriend:

• 80mm Trailmaster suspension
  50mm bodylift
  30x9.5 Cooper STT on 15x7 Fondmetal alloys
  Tough Dog RTC steering damper
  4,16:1 homemade t-case out of a 410 and 413 t-case with Evil Twins twinsticks
  Airflow snorkel
  Homemade bumpers
  Bucket seats
  RAID steering wheel
  etc....

This one, let's just say we put together what was laying around in the shop and it all came together as a stock Zook with 225/75's and YJ flares:





My '85 NT LWB getting a flatbed and waiting for the 2.0i Opel (GM) engine together with the AR35 auto tranny to be installed:

Hi everyone , a few of you will know me from the Daihatsu section when I owned a recently departed Feroza. Yesterday I picked up an XL7, which is completely stock and doesn't really fit in with the previous rig pics in this thread!

It will be getting modded a bit in the future, but realistically it won't get used off road much.

30" Muddies
2" Old Man Emu Suspension
2" Body Lift
Tough Dog RTC Steering Dampner
GME TX3200 UHF
Rally 4000 Spotties
HID Headlight Kit

92 zook under construction
budget build......
cost so far....$3000



updated pic....


$3200 now

1996 Suzuki X-90 Auto
3" springs and coils (Tough Dog)
Calmini bracketry (arms etc)
3" Body lift
Extended brake lines
Calmini rockcrawler gears
Front and Rear Air Lockers
ARB winch bar (no winch... hint hint hint )
Lightforce spotties
31in MRTs on 15X7 alloys
Calmini headers
2" sportz exhaust
Dual battery system - second battery in boot
Snorkel
Slider bars
Bash plates
Roof bars and (sometimes) alloy basket
Flexy Flares
Absolute shitload of metal carved out of the guards!

Future plans... cut off the arse-end and turn it into ute, go solid front end







Final incarnation:

Love the originallity Squick, nice write up in 4wd mothly too. Got any pics of where you managed to squeeze the second battery in?

delete this post

stage 1

sorry about the second post

Just brought mine, completely stock.

so far
90mdl hardtop WT,
29" nankang muddies on 15x7 -12 sunraysia
air compressor mounted under bonnet

very soon: 1" shackle extention and shave front bumper ends for clearance.

Hey guys this is mine bought it 2 years ago for $200 off a good mate
it was a bit rough then slowly fixing her up! The whole drive line was
in pieces wasn't even sure it was all there but I finally worked it out
and got the thing going again just trying to get her Road worthy now.


We usually drive steep rocky or muddy rutted out tracks and plenty of bog holes!!!

1983 SJ40 NT SWB (Soft Top)
Mods Done so far:

*G13b 1.3 ltr engine conversion
*1.0 ltr Transfer
*50 mm Body Lift
*WT Diffs
*ARB Winch bar
*Custom Rear Bar and Swingaway (LED Tail lights)
*Warn 9000 Low Mount Winch
*MU Canvas Ute Style soft top combo
*Autotechnica Monza Race Seats
*IPF LIghts 800D's
*Return to centre dampener
*33 Silverstone MT117 Extreme's
*15x8 F100 Rims -25mm B/Spacing
*40mm Lifted OME Springs
*Kawasaki Green Paint
*3" Steel Custom Snorkel
*Heavy Duty Shackles (8mm Steel) STD Length
*GME TX4600 UHF
*Pirahna Dual Battrey System 150amp
*Rear toolbox For Recovery Gear
*75mm Rubber Flares
*CAT Mud Flaps
*EL Falcon 110Amp Alternator
Plenty of upgrades to come!

Including: F+R Lockers, Proper Roll Cage With 4xRoof Lights, Rock Sliders,Rock Lights

Here Are Some Constantly Updated Pics!!!






Here is My build up thread: http://www.outerlimits4x4.com/ftopic145665.php" onclick="window.open(this.href);return false;

This post needs more Vitara's

Here is mine.

As brought.


Mods

Hi from France !

hi all, newby eric, mine is a '92
ome 2" leaf, front and rear, rear 100 kg over (i carry a bit of beer)
ome shockys front and rear
235-75/15 lt nanking wide conqueror rubber (so far quite good for tracks and road) when pressures adjusted.
land rover cd/radio
rear roll bar
front bullbar
all else standard
im very happy so far, i dont do anything berserk, (much) this little beasty can go where i need it to

'92 WT
SPOA on lux fronts
vit 1.6 with 32/36 weber and 2" pipe
31" Coopers on 15x7" speedys






Im yet to take it offroad properly - still awaiting engineering etc...

Old (first) Zook. 1990 WT Extractors and 1.75" exhaust…


With a mate and his LJ - for the nostalgia


This is my current Zook. 1995 WT 235/75 R15 Lukey Extractors with 2" exhaust…


Autotechnica Bucket Seats
'Shiney' Autotechnica Gear and Transfer Knob

Mods to come…
2" Suspension Lift
Gears

Sold the orange thing in the foreground and just bought the blue thing in the background. Stockers rockers at the moment.



Dont have too many plans for it ATM, just tyres, gears and rear CIG, haing fun as is.

Hi!

Here is my 91 WT Sierra.







The list of mods so far (Well, the ones I can remember anyway!):


Rollbar
Front Lockright and diff / hub / swivel rebuild
Bunnings flares
2" Body Lift (from “just cruizin'”) and new body rubbers.
Diff breathers
Remove leaves from spring packs
Replace all nolathane with soft rubber bushes
Speedy 15x8 et-24 rims with Maxxis Bighorn 31’s
EF Falcon 100Amp alternator upgrade / Optima D34M battery
2-way Radio’s installation
Bonnet release relocation
Volt gauge (made using my old Zook clock)
On Board Air compressor
Rear spotlight
Removable doors / buckle door straps / stainless button head screws
Rear checker plate corners
Hiace/Commodore shocks (Gabriel)
Extended brake lines
Bumpstop extensions
Rear Trail Tough mini-spool
Trail Gear 6.5:1 reduction Gears
2WD-Low mod
Roctoy Ring and re-enforced stock transfer mounts
Transfer breather
Heavy duty Excedy clutch kit, new flywheel, spiget, rear main seal, gearbox input seal
Gearbox Breather
Autotechnica bucket seats (P/N SP24BGS)
Centre console
2" transfer case lift
Winch bar and Winch
Vitara Power Steering


For more info on the build, see my members thread:

http://www.outerlimits4x4.com/viewtopic ... 6&t=169128" onclick="window.open(this.href);return false;


Cheers all,

Pez