Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stump Dumbdunce - The challenge is on

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Posts: 156
Joined: Tue Sep 27, 2005 7:23 pm
Location: Dandenong ranges

Dyna truck

Post by Dyna Beast »

Hello
Here is a novel question.Got a 4wd dyna truck without power steering.Will a 45/55 series power steering box fit?It all ready has a hj45 front end.Also just looking at the motor what is the main difference between H and 2H diesel?Still trying to figure out what I have brought.
Cheers Hall
Hybrid rover ute. Isuzu diesel. Custom suspension. Winch. Snorkel etc. etc.
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Re: 15bt

Post by frp88 »

midi73 wrote:Can anyone help me on the 15bt question
i dont think it is that much better i would mod your 13bt have a look at the specs http://cruisers.bitwalla.com/information/engines.html
LETS GO BRONCOS
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

15bt

Post by midi73 »

Except that I only have a 3b. And despite the statistics I have herd they are a lot better, much more torque. Thanks for the link though.
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

Hey dumbdunce

is the radiator out of a HJ45 the same as an FJ40?
Spit my last breath
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

bad_religion_au wrote:Hey dumbdunce

is the radiator out of a HJ45 the same as an FJ40?
geez you guys, let this thread die - there's lots of other blokes who know as much or more than I do about toyotas - first SEARCH, then if thay doesn't yield results, post a new topic so everyone get s a stab at it!

as for the 40s radiators, it will bolt in but I think the spigots are in different places. it's not rocket science to desolder the spigots/drill new holes/patch up, but changing tanks over takes a bit more skillz.
Free air locker to the first 20 callers!
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Will a 1HZ block bolt up to 1H-DT head??

:finger: :D :finger:
----HillBilly Engineering----
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

MY45 wrote:Will a 1HZ block bolt up to 1H-DT head??

:finger: :D :finger:
yes!
Free air locker to the first 20 callers!
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

dumbdunce wrote:
MY45 wrote:Will a 1HZ block bolt up to 1H-DT head??

:finger: :D :finger:
yes!
Just checking again :lol:
----HillBilly Engineering----
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

dumbdunce wrote:geez you guys, let this thread die - there's lots of other blokes who know as much or more than I do about toyotas - first SEARCH, then if thay doesn't yield results, post a new topic so everyone get s a stab at it!
I have put up a new post re fitting a 15bt to a bj73 and I have done a search on this forum and on the net. I have not received the info I need yet.
Cheers.
Dave.
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

Post by brighty »

sambo wrote:dumbdunce,

Will a power steering box off an 80series fit onto a 60series, i.e. is the bolt pattern the same. If so are the high and low pipes the same fittings or do you need to get them modified.

Will a 80s box give lighter steering than a 60s box.
????? :?:
When in doubt..... UTE-ERIZE it!!!
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: Stump Dumbdunce - The challenge is on

Post by dumbdunce »

Ok I am officially stumped. it's taken over 10 years...

1989 60 series rear brakes when assembled rapidly self over adjust until dragging and get very hot. apart and back together several times. everything looks good, but the problem persists. Has had two complete sets of everything put through it. Drums are new. 2 sets of shoes and all springs and adjusters.


there will be a prize.
Free air locker to the first 20 callers!
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: Stump Dumbdunce - The challenge is on

Post by GUtripper »

Have you got the shoes on backwards, ie leading shoe on the front not the back?
My friends aren't holding me back..... I'm pulling 'em forward.
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: Stump Dumbdunce - The challenge is on

Post by dumbdunce »

GUtripper wrote:Have you got the shoes on backwards, ie leading shoe on the front not the back?
The leading and trailing shoes are the same.
Free air locker to the first 20 callers!
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: Stump Dumbdunce - The challenge is on

Post by GUtripper »

Put Nissan brakes on it.
That will fix it.

What do i win?
My friends aren't holding me back..... I'm pulling 'em forward.
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: Stump Dumbdunce - The challenge is on

Post by stilivn »

https://youtu.be/3w_X8rN8-Wk" onclick="window.open(this.href);return false;
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: Stump Dumbdunce - The challenge is on

Post by dumbdunce »

I missed the bit where he put it all together properly and the self
Adjuster winds the shoes into the drum. Also not 60 series, but thanks
For playing.
Free air locker to the first 20 callers!
Posts: 54
Joined: Sun Mar 20, 2005 1:29 pm
Location: Sydney

Re: Stump Dumbdunce - The challenge is on

Post by sixdeetoo »

Find another brand of brake shoes that are manufactured locally and to the original spec out of a locally grown business.

and several thousand k's later thank Dumbdunce for his persistence with logical process and analysis. :armsup: :armsup: :armsup: :armsup:
2H Intercooled = It really goes.
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: Stump Dumbdunce - The challenge is on

Post by dumbdunce »

sixdeetoo wrote:Find another brand of brake shoes that are manufactured locally and to the original spec out of a locally grown business.

and several thousand k's later thank Dumbdunce for his persistence with logical process and analysis. :armsup: :armsup: :armsup: :armsup:
I'm still having nightmares.
Free air locker to the first 20 callers!
Posts: 7
Joined: Mon Aug 28, 2023 5:44 pm

Re: Stump Dumbdunce - The challenge is on

Post by Caltroe »

dumbdunce wrote: Sun Jul 03, 2016 11:17 pm
I missed the bit where he put it all together properly and the self
Adjuster winds the shoes into the drum. Also not 60 series, but thanks
For playing.
The video is only four minutes long. And the music is upbeat. But really, this kind of repair can take all day.
Last edited by Caltroe on Fri Sep 15, 2023 5:38 pm, edited 2 times in total.
Posts: 7
Joined: Mon Aug 28, 2023 5:44 pm

Re: Stump Dumbdunce - The challenge is on

Post by Caltroe »

GUtripper wrote: Sat Jul 02, 2016 11:53 pm Put Nissan brakes on it.
That will fix it.

What do i win?
What prize did you get? :D
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: Stump Dumbdunce - The challenge is on

Post by dumbdunce »

There are no prizes for retarded suggestions. Should have put 80 series axles under it.
Free air locker to the first 20 callers!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest