Page 7 of 7
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Mon Jul 26, 2010 9:35 pm
by heathgu
You are looking between 12-15k Aus for motor and trans landed here, for good 2nd hand units. New 12-15k just for the engine. Trans new 4-5 maybe more have not price a new unit before. Not sure about your side of the pond but.
I just purchased 3 more motors and a heap of transmission last week. I might have 1-2 engines and a few transmissions for sale very soon.
Cheers Heath
I am going to start a New Member thread about my current build. Will keep this tread going for just tech info regarding duramaxs in general.
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Mon Jul 26, 2010 10:35 pm
by heathgu
That red duramax from previous picture just went 1585rwhp
on drugs over the weekend. 1085 on diesel only.
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Tue Jul 27, 2010 10:00 am
by garth
yeah that Dmitri Millard is a bit of a legend in the diesel community in the states at the mo....
i'll PM you regarding the engines.......
ta
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Tue Jul 27, 2010 4:49 pm
by 20sic
so will we be seeing the new engine debut at powercruise??? soo keen to see it....
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Tue Jul 27, 2010 9:24 pm
by heathgu
No powercruise brisbane this year. Just not enough time to get it all sorted out.
Might go to sydney powercruise next year but for some fun!!
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Tue Jul 27, 2010 9:43 pm
by killalux
Hey all,
Just want to put up that if anyone is looking at doing this conversion I can do a universal standalone wiring harness to suit any of the Duramax engines, Which will make the electrics very simple. Can also have factory cruise control hooked up on the LBZ or earlier engines. I have wired 4 of these now, and have a few more on the go, so know all the tricks to get them working correctly
I am also looking at doing a Plug and Play harness to suit GU patrols which will make it even easier.
Steve
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Wed Jul 28, 2010 8:27 pm
by ozy1
heathgu wrote:No powercruise brisbane this year. Just not enough time to get it all sorted out.
Might go to sydney powercruise next year but for some fun!!
If you do ill be there to watch for sure,
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Thu Jul 29, 2010 7:09 am
by garth
killalux wrote:Hey all,
Just want to put up that if anyone is looking at doing this conversion I can do a universal standalone wiring harness to suit any of the Duramax engines, Which will make the electrics very simple. Can also have factory cruise control hooked up on the LBZ or earlier engines. I have wired 4 of these now, and have a few more on the go, so know all the tricks to get them working correctly
I am also looking at doing a Plug and Play harness to suit GU patrols which will make it even easier.
Steve
what sort of money are you looking at for a GU 4.8 harness to LBZ Duramax steve?
PM me if you have to.....
regards Garth
Re: DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10
Posted: Thu Jul 29, 2010 8:16 am
by killalux
PM sent