Outer Limits 4x4 Board

Posted: **Wed Sep 09, 2009 7:49 am**

ISUZUROVER wrote:There was someone else on AULRO interested.

I am in no rush, but happy to go ahead now if that is the group decision.

Who was this? I must have missed it.

SSmith was the last AULRO member to chime in and has confirmed his payment.

Posted: **Wed Sep 09, 2009 9:38 am**

GRIMACE wrote:
ISUZUROVER wrote:There was someone else on AULRO interested.

I am in no rush, but happy to go ahead now if that is the group decision.
Who was this? I must have missed it.

SSmith was the last AULRO member to chime in and has confirmed his payment.

http://www.aulro.com/afvb/90-110-130-de ... ars-2.html

Not sure if he is serious.

Posted: **Wed Sep 09, 2009 10:16 am**

I have PM'ed him and am awaiting his response.

Posted: **Tue Sep 15, 2009 10:47 am**

Someone in the AULRO thread has questioned whether the lower reduction gears are 49% or 40%. Does anyone have the tooth counts?

Posted: **Wed Sep 16, 2009 11:18 pm**

I've always understood that the lower gears were 49% reduction over standard which roughly equates to a 5:1 reduction. Its pretty farkin low. The 30% works out to roughly 4.3:1 reduction over standard.

Posted: **Mon Sep 28, 2009 2:48 pm**

THERE ARE 10 CONFIRMED DEPOSITS

Warren is going to contact everyone to let you know what he is needing to move forward.

Thanks heaps to everyone that ponied up with the cash and to ISUZUROVER and Grimace for pimping this group buy on AULRO.

Fark YEAH, baby

5:1...here I come

Posted: **Mon Sep 28, 2009 2:59 pm**

w00t w00t!!!

Posted: **Mon Sep 28, 2009 7:32 pm**

the 2 gear sets originally offered by maxi dirve were 30% and 49% lower than standard.

Serg

Posted: **Tue Sep 29, 2009 12:12 pm**

Yep and they are exactly the same from MR Automotive who now own alot of the rights to the old products and the Name.

Posted: **Wed Oct 07, 2009 8:41 pm**

Whats the go ? havent heard anything yet ?

my gears are out ready....

Jeff

Posted: **Wed Oct 07, 2009 8:46 pm**

jbell wrote:Whats the go ? havent heard anything yet ?

my gears are out ready....

Jeff

Not sure, Jeff.

I left it up to Warren to contact everyone as that is what he said he was going to do.

I'll give him a call tomorrow and post up. Maybe give him a call yourself, too?

Your gearing is going to be so farkin insanely low, Jeff. 3000rpm going about 4kph.

Posted: **Wed Oct 07, 2009 9:37 pm**

I hope so got to keep up with these hilux guys with dual cases !!!

Posted: **Sat Oct 17, 2009 9:36 pm**

gears are boxed ready for monday

Posted: **Wed Oct 28, 2009 7:27 pm**

JBell your gears arrived at MR yesterday. I was in there when Dwayne was opening up the box and the letter that was with them.

If anybody is interested i asked MR if they had any intentions in making single piece cross shafts for the centre diff. Dwayne is going to speak to Warren about it and see what they can do.
In my opinion it is allways worth the extra $100 or so to fit one to a LT230 in any instance. Let alone when rebuilding one or fitting reduction gears.
Currently Jac Macs is the only place i know of who do them. They are not very good to deal with though.
If i am told right Maxi Drive did do them in the past.

Cheers Nottie

Posted: **Wed Oct 28, 2009 7:37 pm**

Good news they made it, cheers nottie..

Jeff

Posted: **Wed Oct 28, 2009 9:59 pm**

nottie wrote:JBell your gears arrived at MR yesterday. I was in there when Dwayne was opening up the box and the letter that was with them.

If anybody is interested i asked MR if they had any intentions in making single piece cross shafts for the centre diff. Dwayne is going to speak to Warren about it and see what they can do.
In my opinion it is allways worth the extra $100 or so to fit one to a LT230 in any instance. Let alone when rebuilding one or fitting reduction gears.
Currently Jac Macs is the only place i know of who do them. They are not very good to deal with though.
If i am told right Maxi Drive did do them in the past.

Cheers Nottie

Thanks Jamie!!! I was about to order a cross shaft from Jacmac.

For the WA guys - If you aren't in a hurry, I will be shipping a whole t-case back, so a couple of sets of gears on top shouldn't add much to the cost.

Posted: **Thu Oct 29, 2009 10:36 am**

w00t w00t!

Posted: **Thu Nov 05, 2009 2:01 am**

ISUZUROVER wrote:
nottie wrote: If anybody is interested i asked MR if they had any intentions in making single piece cross shafts for the centre diff.
Thanks Jamie!!! I was about to order a cross shaft from Jacmac.

I would like one too!

Any chance?

Posted: **Thu Nov 05, 2009 7:59 am**

Should be confirming MRs cross shaft availability today. If it is not in the near future we will just have to go with Jacmac.

Posted: **Tue Nov 10, 2009 1:17 pm**

FARK YEAH BITCHES

Just picked up my gears from M.R.

Can't wait to get them in and break some shit

I'm guessing my driveshaft will be the first to go...any takers on a wager?

Posted: **Tue Nov 10, 2009 2:00 pm**

GRIMACE wrote:Should be confirming MRs cross shaft availability today. If it is not in the near future we will just have to go with Jacmac.

Forgot about my own post!

Confirmin we are just goin Jacmac single peice cross shafts.

Micka wrote:I'm guessing my driveshaft will be the first to go...any takers on a wager?

w00t w00t

Micka your front CW&P will be the first thing to say goodnight when you load it up good and proper on some stickies

Posted: **Tue Nov 10, 2009 2:21 pm**

GRIMACE wrote:
GRIMACE wrote:Should be confirming MRs cross shaft availability today. If it is not in the near future we will just have to go with Jacmac.
Forgot about my own post!

Confirmin we are just goin Jacmac single peice cross shafts.

Micka wrote:I'm guessing my driveshaft will be the first to go...any takers on a wager?
w00t w00t

Micka your front CW&P will be the first thing to say goodnight when you load it up good and proper on some stickies

Woo Hoo!

That will be just the excuse I need to get cryo treated 4.88s

Posted: **Tue Nov 10, 2009 3:04 pm**

Micka wrote:
GRIMACE wrote:
GRIMACE wrote:Should be confirming MRs cross shaft availability today. If it is not in the near future we will just have to go with Jacmac.
Forgot about my own post!

Confirmin we are just goin Jacmac single peice cross shafts.

Micka wrote:I'm guessing my driveshaft will be the first to go...any takers on a wager?
w00t w00t

Micka your front CW&P will be the first thing to say goodnight when you load it up good and proper on some stickies
Woo Hoo!

That will be just the excuse I need to get cryo treated 4.88s

who needs excuses

Keen to get these gear in to see if i indeed need them or not haha!

Posted: **Wed Nov 11, 2009 10:04 pm**

GRIMACE wrote: Forgot about my own post!
Confirmin we are just goin Jacmac single peice cross shafts.

Hooray!
Price?
Group buy?Discount??

Availability?

Posted: **Thu Nov 12, 2009 1:56 am**

Michele wrote:
GRIMACE wrote: Forgot about my own post!
Confirmin we are just goin Jacmac single peice cross shafts.
Hooray!
Price?
Group buy?Discount??
Availability?

IRC they are ~120AUD$ each. Contact jacmac http://www.mcnamaradiffs.com.au/

They don't do credit cards, so hope you have international transfers sorted???

Posted: **Thu Nov 12, 2009 2:48 am**

Oooh cr@p!!!!

Intl. transfers sorted, but the post charges me a lot in fees

Any good mate volunteering to get my cash via Paypal?
I'd send the money for the stamps as well, and beer

Posted: **Thu Nov 12, 2009 4:19 am**

Michele wrote:Oooh cr@p!!!!

Intl. transfers sorted, but the post charges me a lot in fees

Any good mate volunteering to get my cash via Paypal?
I'd send the money for the stamps as well, and beer

I'm sure we can sort something out

Posted: **Thu Nov 12, 2009 5:51 am**

Viele danke!

Posted: **Thu Nov 12, 2009 8:52 pm**

g'day fellas

I'm in the process of setting my disco up for comp , This morning I spoke to Warren and he assures me that I could still get the reduction gears at the price of the group buy , so when funds allow I will be joinging the reduction gears band wagon & placing my order in 30% reduction gears,
I'm going to pull my LT230 transfer case off to be shipped off to QLD for MR to put the gears in and rebuild the box if need be with new bearings.

Posted: **Fri Nov 13, 2009 5:24 am**

Good stuff^^^^

Welcome to the most successfull group buy on OuterLimits

But go with the 49% gears. You can always grab 2nd gear

Outer Limits 4x4 Board

Group Buy: Maxi Xfer Gears **HOLY FARK - THERE'S 10**

Group Buy: Maxi Xfer Gears HOLY FARK - THERE'S 10