Outer Limits 4x4 Board

my serria has got

2.6litre sigma motor and auto with magna fuel injection
rear mount radiator
35 baja claws
hilux axles
custom coils and long arm kit(home made)
roll cage
racing seats and harrneses





[/img]

kiwi bush truck not quite finished

90mm lift
215/75 BFG MTs
Dual batteries
ERPS rust prevention
Plus other stuff

Daily driven + regular beach camping + wheeling

`86 SJ413k with 90k km. stock height with 31". 1.9 TD

I've lurked here for quite a while off and on. Mostly in the Mitsubishi section. But my sami is the one I work on the most.

86 lwb
1.3 swift twin cam
toy axles locked front/rear
YJ springs.

Soon to get a 1.6TD VW

New forum lovely

Vidar, Lj80 one of 5-6 still on the road in Norway, registered and dd. 1983, F10a engine, 2" exhaust, 413 disty, 410 brakes up front, freewheeling hubs from 413, 30" Mud on 8x15 rustspoke, fiberglass fenders and front from Weiss Design, and lots more....


Vidar ..@.. offroad.no
Founder Suzuki 4x4 Norway

This is how it was when I bought it 6 months ago:




Since then its had: (Pics to follow when I take some)

2" spring lift
Lost the ugly bar work


Still to come:

30's
Rockhopper
air lockers (when I get enough cash to justify it)
EFI motor (again, cash depending)
respray, as the paint is getting tired
custom front bumper (replace the bent stock one)

LWB chaise and body 38"swappers 60 series diffs and driveshafts locked rear rockhoppers ifs leafs with buggy leaf set up relocated fual tank fliped rims 4" off set each rim

84 lwb
lockrights front and rear
30's
Vitara 1.6 carby

Hi Guy's,

We are based in NZ and have a couple of Zooks.

This is our main off road rig:



and our fravourite toy




We get out in them as much as we can on club trips, winch challenge's, fun rally's, tough truck events and a bit of Trials.

Here's a link to my intro thread in the members section


http://www.outerlimits4x4.com/ftopic192254.php



Cheers,
Pete & Sarah.

It's great to look at all these modded Zooks.
Mine is fairly tame.
Standard 1.6 carby motor
Lots of home made stuff like front & rear bar & sliders
Bash plated underneath.
Also
Cute little 3500lbs winch
Front & rear ARB air lockers.
Little mud tyres and povo alloys.
2" suspension lift.
UHF
spotties.


It's a good balance between city run-around and serious toy.
It keeps up with the big trucks.

My almost done lwb, gonna ride soon
At pict w/o rear bumper
2.0 v6
32" insa turbo special track

troopy94 wrote:

Is that a Trail-Gear chassis extension and coil kit??

Nowhere near finished

Extractors & 2" exaust
Extended shackles
Spartan Rear locker
1l Transfer case
31x10.5 Wrangler MTs on 15x7 Alloys

Outerlimist wont let me post pics/links yet as I have to post 10 times.
I will do some posts then edit this one.

More flex and wheel clearance on its way via UPS.

this is my little white beast (normally a a dark brown color)
G16b MPFI
Excractors and 2inch system
spoa on lux diffs
lockright locker (rear)
33's

to come
reduction gearing
a nother 2 inch lift
armour for the under side
more bar work
and may be some thig else to the motor

[/img]

Due to the number of threads being created just for the purpose of show a pic of your rig for fellow suzuki forum readers to view the 'PICS OF THE ZOOK FORUM RIGS!' thread has been recreated. A number of the photos that existed in the original thread are no longer there, so its time for a new begining.

"Please if possible update your Post in the Zook Forum Members thread at the top of the page and where possible briefly explain why you've modded your car in any particular way and mention what sort of terrain you drive."

But first a few rules!
Only ONE POST per USER! If you make changes to your rig then update your original post.
NO CHIT CHAT! If you want to chat about your rig create a thread in the members section Here If you allready have a members thread than place the link in your post. If you have a build up thread than include that link aswell.
If you have any problems with this then please PM me.



Please read the above rules regarding this post. Its a quick profile and pic, not your life story

Layto.....

My 1992 1.6ltr swb zook
2 inch ironman suspension lift
2 inch body lift
1.5 inch extended spring hangers
1992 G16A carbi motor
Air Lockers front and rear
monza race seats
airflow snorkel
31x10.5R15 muds
K&N pod filter
Nitestalker driving lights
Redark duel battery system
Extractors and 2 inch exhaust
Ebay engine start button [just for fun]

my 94 wt sierra, love playing on rocks and in mud

custom bull bar with winch
33 maxxis buckshots
15 inch f100 rims
2inch springs 2 inch shackle lift
dual batterys
s3 rockhoppers
enclosed extra cab
custom roll bar
rear light, rocklights
kc spottys up front
fibreglass top
dual compressors with tank and air horn
2inch exhaust system with extractors

things to come
exo cage
power stearing
lockers
snorkle
ruf
rear bar

92 Body on 88 chassis
beat up soft top cut into ute
1.6L Vitara EFI
2 inch extractors and sports exhaust
31*10.5 BFG muds on big offset 15*8's
Front and Rear Lockrights
2" old man EMu suspension
2" Bodylift
Rockcrawler gears

"Spooki"

'93 tintop
Reco'd 1.3L with 4-1 extractors, 1.75" exhaust
31x10.5 STTs on 15x7 F100 rims
RUF with 100mm shackles (+30mm) and relocated hangers, 2" OME springs rear
TrailGear 6.5's
Lockrights F&R
Custom bullbar, Lightforce XGTs and 170s (both 55W HID), custom shelves, amped stereo, UHF, central locking, alarm, comfy bits

my zook

Old and new

87' NT Sierra

1.3/ 5 speed
1lt transfer
235's
2" Body lift
5.12 diff ratios
Welded rear


Wish list:
RUF using old rears, 2" lifted rears + shocks to suit
F100 rims + 30-31" tyres
Front lockright
Sell 5.12's + 1 litre transfer to buy 6.5 transfer gears
Reco carby
etc etc

Edit 31May2011:
Have 6.5 gears from lowrange to install
Fitted 2" spring lift and 30" A/t's
Plan to build exo cage to protect bodywork

just purchased..

91 swb vitara
32" maxis bighorns
2.5 suspension lift 2" body
custom front bar
warn 8000 pound winch
endless air set up off a/c compressor
welded rear diff





plans for the future
sas using hiluxs diffs 3 link front a frame rear (already started )
3.8 ecotec conversion using 4l60e auto and nissan 720 transfer case(nearly have all the parts)