Outer Limits 4x4 Board

Thanks alot guys i think i'll give dave a ring tommrow or something to see what we can come up with..

Thanks for ya help and yeah the more i imagine that bar i was thinking of making the worse it will look

Cheers

Rick.

Shorti wrote:

striker99 wrote:Try contacting you local hardware store and ask them to do it bunnings wearhouse would most likely be a good one if theres one near you.

Bunnings don't do anything like that...

Righto was just a guess since they sold alot of steel

i bent 42mm pipe with 4 mm walls with a supercheap hudraulic bender...

superzuki wrote:i bent 42mm pipe with 4 mm walls with a supercheap hudraulic bender...

good work...

tip for you for next time..if you want to eliminate the little dents inj the tube where it sits on the rollers get some 40nb tube about 100mm long and cut it in half..place it over the tube between the tube you are bending and the rollers..it will spread the load and wont kink your tube...i actually used to have two pieces welded to the rolers...worked good and i did heaps of bends with it..

dave

That sounds like a good idea , might try that , Cheers Paul.

Be my friend ,Cheers Paul.

Nice bar ... time to start on ya sliders

why build a bar that dosnt have capabilities for a winch

YankeeDave wrote:why build a bar that dosnt have capabilities for a winch

Maybe he doesn't plan on getting stuck