Outer Limits 4x4 Board

How did you guys go with these flexi flares? can you get em in aust yet?

cheers

Camo

Me too !!!

BUMP! :-)

G'day guys.

Still haven't fitted them yet
Gone back to full time uni so it has taken precedence over most things whilst trying to earn a $.

Finish this week, will be on the truck within the next month for sure now I have some time.

Who's interested in them???

I can organise another buy if there is more support....
PM Me.

Dave.

I will be in for sure

Camo

A few shots of the flares from Paddocks on my Disco.

Me to dave I just miss out on the other batch

They look pretty good!

Camo

I got some direct on a once off deal via someone in the uk and am pretty happy with them too! Didnt end up using the piping that comes with them and some of the screws were too long but otherwise they are very good and heaps better than the fibreglass ones. Incidentally I found them on another site (Famous Four) I think it was for less than Paddock had them for...

Anyway I recommend them...

I wish they made them for the D2

http://www.innovation4x4.co.uk/arches.htm

Looking at ordering these flares in the next few weeks for my rangie

just checking that there are no one selling them in aust yet?

still keen on a group buy if anyone is keen

Camo

Let me know if anybody is intrested perhaps we can do a group buy on this one, I speak to the this bloke often on one of the American forums

Rangie Flares

http://www.lucky8llc.com/ImageUploads/warchesL10.jpg

Disco 1 and 2 flares

http://www.lucky8llc.com/ImageUploads/P ... mage01.JPG


http://www.lucky8llc.com/Index.asp

hi v8 rangie, i was interested last time but wasn't sure if they were big enough to cover my already cut guards. I have LRA 2 door flares on mine, the arches come right up to the body line.

stikman, could you please post dimensions of yours? They look quite big so they could do the job.

I have just posted update pics of my build, you can see the size of flare and cut out easily.

Cheers

Steve

Yeah stikmans look pretty good.. had a look at them the other day. I'm sold for sure

Hope they will cover your cut guards

Camo

Just to let you know the paddock ones claim to fit Rangie and Disco as they are flexible. Kind of a one size fits all approach. The only things to specify are:-

1 Do you want 2 door or 4 door.

2 Do you want 75mm or 50mm cover.

ill be in on a set of 75mm for the 4 door rangie if u guys are looking at doing another group buy

id be in for a set of the narrower 50mm ones of the roccia competitiion type flares 4 a 4 dr rangy

If they fit the D2 Id be intrested in the 75mm ones

schuler wrote:
stikman, could you please post dimensions of yours? They look quite big so they could do the job.

Cheers

Steve

Hi Steve,
Let me know what dimensions you are after and i will take some measurements.

Also, from what i know the Flexi Flares are one size only (not the 50or75).The 50mm or 75mm ones are fibreglass.

Regards
Philippe

Just to clarify the "flexy flares" with or without the wire inserts are a rubber flare and bend to whatever radius of the wheel arch you like.

The "Flexible Fibreglass look Flares" imported from the UK through innov 4x4 or Paddock are a high density resilient plastic in a pre-moulded shape similar to the LRA fibreglass flares and are a fixed size.

They come in either 50 or 75mm widths off the body.

Because they have some give they will go on either rangie or disco (and probably D2 but an email to the guys at Paddock or Innov wouldnt go astray.)

If you go to Stefanos Greek Disco 2 (Page 19 of Post up your rovers) it looks like he has got the 75mm flares on his- they dont look bad...

stikman wrote:

schuler wrote:
stikman, could you please post dimensions of yours? They look quite big so they could do the job.

Cheers

Steve

Hi Steve,
Let me know what dimensions you are after and i will take some measurements.

Also, from what i know the Flexi Flares are one size only (not the 50or75).The 50mm or 75mm ones are fibreglass.

Regards
Philippe

Hi Philippe,

Could you tell me the width of the opening at both the top and botom of the flare, the total width of the flare top and bottom and the height of the opening including total height of the flare.

By the way what is the depth, is it over 50mm?

Thanks

Steve

sweet yeah defernatly want the flairs now when can we do another buy

Just to clarify, i am after the flexible flares, Product code: 64-FWA from the innovation web site.

stikman, can you clarify that these are the type you have fitted, and not the GRP versions.

I don't want the clarke rubber look.....

Thanks

Steve

schuler wrote:

stikman wrote:

schuler wrote:
stikman, could you please post dimensions of yours? They look quite big so they could do the job.

Cheers

Steve

Hi Steve,
Let me know what dimensions you are after and i will take some measurements.

Also, from what i know the Flexi Flares are one size only (not the 50or75).The 50mm or 75mm ones are fibreglass.

Regards
Philippe

Hi Philippe,

Could you tell me the width of the opening at both the top and botom of the flare, the total width of the flare top and bottom and the height of the opening including total height of the flare.

By the way what is the depth, is it over 50mm?

Thanks

Steve

Sorry for the delay. Some rough measurements.

Front - Height at front ~150 opening + ~80 flare, Height at rear ~350 opening + ~80 flare, Width a top ~550 opening + ~80 flare, width at height of front low point ~710 opening + ~80 flare.

Back - Height ~350 opening + ~80 flare, Width a top ~540 opening + ~80 flare, width at middle ~760 opening + ~80 flare, width at bottom ~880 opening + ~80 flare.

Let me know if this is helpful or confusing

Flares sit 50 from the body, and looking at both Innovation and Paddocks i cannot see a 75mm version available in the Flexi Arche (Flare), 75mm only available in the GRP (fibreglass).

These are the ones i purchased (PM788) http://www.paddockspares.com/pp/OFF_ROA ... _of_4.html which i beleive are the same as 64-FWA from http://www.innovation4x4.co.uk/arches.htm

Hope this helps everyone.

I would be interested in a set of 50mm to suit a 2 door rangey once a final price is confirmed.

Cheers

[/quote]Sorry for the delay. Some rough measurements.

Front - Height at front ~150 opening + ~80 flare, Height at rear ~350 opening + ~80 flare, Width a top ~550 opening + ~80 flare, width at height of front low point ~710 opening + ~80 flare.

Back - Height ~350 opening + ~80 flare, Width a top ~540 opening + ~80 flare, width at middle ~760 opening + ~80 flare, width at bottom ~880 opening + ~80 flare.

Let me know if this is helpful or confusing

Flares sit 50 from the body, and looking at both Innovation and Paddocks i cannot see a 75mm version available in the Flexi Arche (Flare), 75mm only available in the GRP (fibreglass).

These are the ones i purchased (PM788) http://www.paddockspares.com/pp/OFF_ROA ... _of_4.html which i beleive are the same as 64-FWA from http://www.innovation4x4.co.uk/arches.htm

Hope this helps everyone.[/quote]

Hi stikman,

thank you very much for taking the time to measure them, i'll check my measurements out over the weekend and see how we go.

Thanks once again for the effort

spot on with the 75mm, I knew they were on the same page but you are right the flexis only come in a 50mm which is what I got.

Cheers

I'm definitely interested in a set of 50mm to suit a 2 door rangie once a final price is confirmed. Who's doing the buy ?? how many definite's do we have ??

the flare on Stefanos Greek Disco 2 are they the same flairs ? also do they stop b4 the bull bar or do they go right down the panel?