Page 2 of 2

Posted: Tue Jul 17, 2007 11:37 am
by bj on roids
Sic Lux wrote:Don't 60's have offset diff unlike lux in centre correct me if i'm wrong so tailshaft angles could be a drama :?:
the uni's won't even know they are running horizontal instead of vertical angle ;) :cool:

Posted: Tue Jul 17, 2007 11:38 am
by bj on roids
beebee wrote:
bj on roids wrote:why does everyone use stock links?

how hard is it to make your own links? :?
Stock links make engineering a possibilty. Non std links makes it almost impossible.
AHHHHHHHHHHHH

*many pennies are dropping*

Posted: Tue Jul 17, 2007 12:13 pm
by RUFF
bj on roids wrote:
Sic Lux wrote:Don't 60's have offset diff unlike lux in centre correct me if i'm wrong so tailshaft angles could be a drama :?:
the uni's won't even know they are running horizontal instead of vertical angle ;) :cool:
It does not matter how many times you try and explain this to some people they just never get it.

Posted: Tue Jul 17, 2007 3:25 pm
by Guy
RUFF wrote:
bj on roids wrote:
Sic Lux wrote:Don't 60's have offset diff unlike lux in centre correct me if i'm wrong so tailshaft angles could be a drama :?:
the uni's won't even know they are running horizontal instead of vertical angle ;) :cool:
It does not matter how many times you try and explain this to some people they just never get it.
Yep you are simply rotating the axis on which they work ...
If it is vibrating simply drive your veheilce on a 35% side slope and the vibrations will go away :D

Posted: Wed Jul 18, 2007 4:01 pm
by Spimon_NH
Well then, if no one can see any huge problems I'm going to have, I'll start looking into it (plenty of time to check it'll work while saving up for it) :lol:
Just the steering that scares me a little, hehe.

(Should give me some 'cooling off time' too, to lose interest in yet another one of my incredible plans :oops: )