I like the therory on air in the line etc but the fuel filter was always only 2/3 full of fuel . I can't say the problem was fixed with a second hand carb but never had it again . I also never drove it on the road again just before the carb was fitted , lives on a trailer now .
The carbs get a bad rap , when in good working order they are good but like any vehicle they go bad and also probably get a lot of crap thrown at them most carbs do not .
Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Drook's Dead - Finding The Problem
Goddess of Self Esteem Issues!
OK..
Got Dad to have a look.
He adjusted the timing, and he says it now runs smoothly.
I'm taking it for a drive this arvo. Hoepfully taking it home.
You'll hear about it if I break down.. lol
Next: Install Crawler gears and 3" body lift.
Got Dad to have a look.
He adjusted the timing, and he says it now runs smoothly.
I'm taking it for a drive this arvo. Hoepfully taking it home.
You'll hear about it if I break down.. lol
Next: Install Crawler gears and 3" body lift.
3 Kittens need a home in Sydney - PM for more details!WICKED wrote:I flogged mine for a good hour this arvo!
Any particular reason for 3" ?? Is it just to fit in in NSW with all the SPOA cars? or do you have a roll cage to try out?MissForby wrote:.......3" body lift.
Assuming you have slightly lifted springs why not look at a 2" with a little trimming of the guards? heaps easier to do (and un do if you need to)
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
I second that. NT suzukis with 3" body lifts are scary. 2" is plenty and if the tyres you want to run still rub, just play with guard trimming and bumpstop spacing to suit.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Goddess of Self Esteem Issues!
I've only got 2" susp lift, and it's still SPUA.
Susp lift is barely noticeable in fact, the thing looks just about stock.
Not keen on chopping the guards just yet. Everyone I have spoken to, who has seen the car, all say 3" body should be fine. If I start going SPOA. it'd be time to re-think things.
Once the crawlers gears and the body lift go in, it's staying as is. Buying a house and getting outta the in laws place is top priority atm.
Susp lift is barely noticeable in fact, the thing looks just about stock.
Not keen on chopping the guards just yet. Everyone I have spoken to, who has seen the car, all say 3" body should be fine. If I start going SPOA. it'd be time to re-think things.
Once the crawlers gears and the body lift go in, it's staying as is. Buying a house and getting outta the in laws place is top priority atm.
3 Kittens need a home in Sydney - PM for more details!WICKED wrote:I flogged mine for a good hour this arvo!
i wouldnt go 3"
i got 2" in mine and i still havnt decided if im going to stick it in my other one when i transfer the parts over. i drove up on the GU and it nearly fell over
keep it low as possible and trim the guards to suit larger tyres.
i got 2" in mine and i still havnt decided if im going to stick it in my other one when i transfer the parts over. i drove up on the GU and it nearly fell over
keep it low as possible and trim the guards to suit larger tyres.
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Who is online
Users browsing this forum: Bing [Bot] and 2 guests