Outer Limits 4x4 Board

mwhitfield_2000 wrote:who knows what e-mail address is for chaos 4x4, their e-mail address not their web site, anyone??

Think there called offroad industries now.

whitfield...............i suggest you contact these guys http://www.supertrux.com/Index.htm

they are in england, but they should be able to answer all of your q's easily as they specialise in big carpark cruising luxes that are useless in a real offroad situation

see pic below

would 10 inch blocks be any good, and can that be enginered!!

Can Anyone give me a pricing on a 6 inch lift kit, and what does it include?

mwhitfield_2000 wrote:would 10 inch blocks be any good, and can that be enginered!!

He`s pulling your leg but hes got some tyres for sale you should think about!

Remember if you get bigger tyres you`ve got to be able to drive them

Rockhoppers or duallies are the go.

mwhitfield_2000 wrote:Can Anyone give me a pricing on a 6 inch lift kit, and what does it include?

Do what NICK said in his last reply and have you decided what hilux year model you want.

a portalled lux...

4sum4 wrote:

mwhitfield_2000 wrote:Can Anyone give me a pricing on a 6 inch lift kit, and what does it include?

Do what NICK said in his last reply and have you decided what hilux year model you want.

If he has to ask about the 10 inch lift block then I don`t think he`d be able to do what nick has said to do.

He needs a off the shelf suspension kit.

mwhitfield_2000 wrote:would 10 inch blocks be any good, and can that be enginered!!

OMFG

Are you for real

Is this you BJ

Shorty40 wrote:

mwhitfield_2000 wrote:would 10 inch blocks be any good, and can that be enginered!!

OMFG

Are you for real

Is this you BJ

Nah i think he's just a young fella, keen to get into a Fourby!

I think hes just taking us for a ride.............noone could possibly be silly enough to be even thinking of asking so many dumb q's??

Whaddyas reckon??

diesel028 wrote:noone could possibly be silly enough to be even thinking of asking so many dumb q's??

Oh yes they can, you obviously haven't been reading the Nissan area over the last month!!!!

Well, dumb questions (seemingly to us, but not to him) they may seem, but if he has little knowledge on the subject, perhaps we could all help educate him with good tech and common sense.

Nissan section? Hmmm, we havent got to page 9 yet...

Something must be done... this is f'n ridiculous!

bundyboy wrote:Something must be done... this is f'n ridiculous!

i was just letting it go for a laugh!!!!!!



from now on, only serious replies.



NICK

For all who are interested in the idenity of mwhitfield im going to reveal it.

M whitfield is actually matt whitfield the man who is respsonsible for destroying his hilux, his mq on many occasions and now his dads big gq has taken a big beating from a truck that was in perfect condition 6 months ago before matt got his hands on it.

Eddie is his little brother and has been typing this stuff under his name. Eddie is getting his lux at the end of the year and is just going to build a big rig that is useless offroad is going to be more for onraod looks. Was taliking to him yesterday in the river at cabbage tree about it and he has seen how much matty has destroyed trucks and doesnt want to repairing one all the time. I know all of eddies mates from youth group and they are just as crazy they come wheeling with us heaps and they all want fj40s and fj45s running big tyres and are talking about who is going to roll first out of them.

Now you know eddies identlty keep an eye out for any stupid behavious around the hills area because its bound to matty

Maybe he is after something like this? It was registered in NSW until he rolled it!

spazbot wrote:look at rigs like hypolux and ruff, they are very close to all the luxs in the states, they arnt really that big, if you want a big rig with 8" lifted leafs, its not going to flex it will just be tippy and shit, also your talking some serious $$ for a big lift like you want, and good luck getting it enginered.
Keep it low cut the guards for bigger tyres.

I took a ruff measurment from my bonnet height today and with 38/12.5/15TSLs@5psi i am only running a total of approx 4" of lift from standard and this includes the tyres and 60mm body lift. So if i fit stock wheels i should actually be lower than stock. I have a stock 86model deisel 4wd with 205/75/15s and split rims that im comparing this too.

I also did lower it some more today to get it to this height. The 38s still dont scrub on the firewall.

pegasus wrote:Maybe he is after something like this? It was registered in NSW until he rolled it!

Pretty sure its still around with 35`s it has 16 shocks all over it ,thats probably why he rolled.

RUFF wrote:

spazbot wrote:look at rigs like hypolux and ruff, they are very close to all the luxs in the states, they arnt really that big, if you want a big rig with 8" lifted leafs, its not going to flex it will just be tippy and shit, also your talking some serious $$ for a big lift like you want, and good luck getting it enginered.
Keep it low cut the guards for bigger tyres.

I took a ruff measurment from my bonnet height today and with 38/12.5/15TSLs@5psi i am only running a total of approx 4" of lift from standard and this includes the tyres and 60mm body lift. So if i fit stock wheels i should actually be lower than stock. I have a stock 86model deisel 4wd with 205/75/15s and split rims that im comparing this too.

I also did lower it some more today to get it to this height. The 38s still dont scrub on the firewall.

ruff can you post some measuremnts of the stock lux so i can work out how high mine is

I will tonight. I also farked up on my measurements which are not totaly acurate anyway but im 8" higher than stock including tyres and body lift. So on stock tyres that should make it around 1 inch lift in the springs.

spazbot wrote:ruff can you post some measuremnts of the stock lux so i can work out how high mine is

Took some propper measurments today on both vehicles.

I only took one measurement and it will only realy suit a gen 2 hilux. I measured from the ground up to the drip rail/gutter above the drivers door and it measures exactly 1700mm that is with 28" tyres and stock springs that look ok not too sagged.


Mine in the same place measures 1890 which is aprox 7.5" above stock. Im on 38TSLs with a 60mm body lift so im only really running 1/2" of lift in the springs. and in the front this comes from 2"dropped hangers. My springs are nearly flat with stock length shackles.

RUFF wrote:

spazbot wrote:ruff can you post some measuremnts of the stock lux so i can work out how high mine is

Took some propper measurments today on both vehicles.

I only took one measurement and it will only realy suit a gen 2 hilux. I measured from the ground up to the drip rail/gutter above the drivers door and it measures exactly 1700mm that is with 28" tyres and stock springs that look ok not too sagged.


Mine in the same place measures 1890 which is aprox 7.5" above stock. Im on 38TSLs with a 60mm body lift so im only really running 1/2" of lift in the springs. and in the front this comes from 2"dropped hangers. My springs are nearly flat with stock length shackles.

Obviously the 38's are not 38" in height because this should give you around 9" of lift over standard.

5" for the tyres
2.4" in BL
1/2" in springs
1" in dropped hanger

Anyway I thought stock hiluxes run 30" tyres with optional 31" ???

BTW mine runs at 1875mm with 37" mtr's, 2" BL, 1" extended shackle and spring lift. I am trying to work out how to lower it to around 1810mm. Not sure if it is possible, but will be coming from the springs and extended shackle. I want to run flat springs. Can't lower the BL any more because of the motor hitting the firewall.

Chris.

RUFF wrote:and in the front this comes from 2"dropped hangers. My springs are nearly flat with stock length shackles.

ruff off subject...but why did you opt for the 2inch dropped front hangers with stock length shackles...wouldnt you get better departure clearance with stock front hangers & 2 inches in the shackles??

Yes but then my springs would hit the steering and also i went forward 2" at the same time to get the tyres out of the firewall.

cbr wrote: Obviously the 38's are not 38" in height because this should give you around 9" of lift over standard.

the tyres are 9 inches taller, but the axle only raises 4.5inches.

383FJ45 wrote:

cbr wrote: Obviously the 38's are not 38" in height because this should give you around 9" of lift over standard.

the tyres are 9 inches taller, but the axle only raises 4.5inches.

Read my post again

RUFF wrote:..snip
only took one measurement and it will only realy suit a gen 2 hilux. I measured from the ground up to the drip rail/gutter above the drivers door and it measures exactly 1700mm that is with 28" tyres and stock springs that look ok not too sagged.

Mine in the same place measures 1890 which is aprox 7.5" above stock. Im on 38TSLs with a 60mm body lift so im only really running 1/2" of lift in the springs. and in the front this comes from 2"dropped hangers. My springs are nearly flat with stock length shackles.

38" - 28" = 10" difference therfore 5" gained in height. In tyres alone.
Assumtions:
The 38's are 38" tall
The 28's are 28" tall
The weight of the vehicle does not effect the tyre size

Chris.

sorry mate wasnt tryin to be smart or nothin just thought you we're sayin coz they are 9 inchs more in diameter they give ya 9inchs of lift. just took it the wrong way.

383FJ45 wrote:sorry mate wasnt tryin to be smart or nothin just thought you we're sayin coz they are 9 inchs more in diameter they give ya 9inchs of lift. just took it the wrong way.

That's cool

I wonder if this trucks is finished yet