Page 2 of 3

paj

Posted: Fri Apr 18, 2008 2:48 pm
by klrevo
good effort mate, and coilovers :cool:

sits about as high as mine does :lol: get some 35"s and yeh take the bodylift out, wish i could take mine out, few restrictions but we'll see.

dean ;)

Posted: Mon Apr 21, 2008 6:41 pm
by NJV6
Hi Sam, you still about big fella?

You vehicle looks great. A bit like a go cart but hey, 35 's + should fix that. Maybe a wheelbase stretch! :D

Are your coil overs adjustable for height?

If you don't take the body lift out then there is a brilliant opportunity to chop the chassis behind the rear panhard mount and raise that dam petrol tank.

Cheers, G

P.S. I bought the JTop, Rolled, V6, locker.... $400 :D Hope it goes!

Posted: Mon Apr 21, 2008 7:33 pm
by WACKO
yeah im still about.. just had alot to do lately. that jtop would have been mine if it wasnt on that side of the ditch!! haha.. good score tho.
time to give spanky a call ;)

Sam

Posted: Mon Apr 28, 2008 8:17 pm
by j-top paj
paj is lookin :cool:

giving me more incentive to do it to mine :D

Posted: Tue May 06, 2008 5:53 pm
by HotAe92
SCHWEEEEET!

Posted: Thu May 22, 2008 9:32 pm
by lmacka
Oh, dude... That's cool!!

I need to do something like that to mine!

Posted: Tue May 27, 2008 9:16 pm
by WACKO
im on to the steering fluid lines now. can frank or hekta or someone tell me what they did with the steer fluid cooler pipe thing that (currently on mine) hangs down flaping in the breeze?

half way through the ifs hub swap, just got to put the left hub together. the calipers have been milled down so they work and just got to rebuild them and paint em and on they go.

tierod is going to the engineers tomorro to get shortened then the draglink on thur i hope.

gota get it going for a trip this weekend! teh pressure is on!

Sam

Posted: Wed May 28, 2008 6:30 am
by NJV6
If no response you might have to go have a sneak peek under JTop's.....

Posted: Wed May 28, 2008 2:56 pm
by Turoa
WACKO wrote:gota get it going for a trip this weekend! teh pressure is on!
you better have it going aswell. Ive got the 37's sitting here waiting for ya because it looks like the hilux isnt going to be goin on the weekend :cry:

Posted: Wed May 28, 2008 6:03 pm
by WACKO
hhaha.. ive got some 35s off sig now. had a lack of power with 35s last time so ill see how these go... i may pop up and try the 37s tho.... just for s#$ts and giggles tho...

Sam

Posted: Wed May 28, 2008 6:04 pm
by WACKO
NJV6 wrote:If no response you might have to go have a sneak peek under JTop's.....
good idea.. might just do that...

Posted: Fri May 30, 2008 10:06 pm
by WACKO
been working on it steadily all week, but run into some problems.

went and got bolts for the coilover mounts... even tho i supplied a sample they still supplied the wrong ones and arnt open again till tue so im off to hunt a couple of other places tomorro. found the 60 series ball joint doesnt fit into the prado pitman arm, so going to try a prado balljoint tomorro.also fount the tierod is hitting on the panhard mount on right hand lock. so going to have to take some off that till it clears.

on the up side, the power steering box is plumbed up. got the connectors for th toyota box off a surf and took the old lines into a hydraulics place, $15 later and they were done. no cooler at the moment, but will have before long, and the ifs hub swap is finished.

hopeing i make some decent progress tomorro as i feel like i havent made stuff all today!

Sam

Posted: Mon Aug 18, 2008 8:05 pm
by NJV6
bumpety bumpety...

Unless she is worth it - forget snowboarding - get this dam thing finished!

Posted: Mon Aug 18, 2008 8:06 pm
by j-top paj
updates? :P

Posted: Mon Aug 18, 2008 8:12 pm
by NJV6
Its winter. And Sam only does one thing then - watching girls on snowboards :cool:

Posted: Tue Aug 19, 2008 8:02 pm
by WACKO
they are alll worth it!!!

Posted: Sun Nov 30, 2008 2:33 pm
by WACKO
got my tyres yesterday, so couldnt resist putting them on and doing a little bit of a flex test on a dodgy little ramp... still no brakes and the short side axle isnt in so i only had 2wd.

Image

Image

even fits in the garage still!

Image

Posted: Mon Dec 01, 2008 9:10 pm
by WACKO
sorted the p/s cooler tonight. mounted and plumbed up. mounted it behind the right hand headlight. wont get much airflow but as it was justa pipe before i figure it will be fine as its a lancer evo 4 cooler.

Image

now i just want to know if i need to be carefull of anything with it? its not mounted too high in the engine bay, plumbed up wrong or somthing?

cheers, Sam

Posted: Tue Dec 02, 2008 7:44 am
by Greg_M
wouldn't want to blow a headlight globe now, might be a tad tricky to get to. Looks awesome though, SAS'd paj's look a whole lot better than lifted patrols IMO.

Posted: Tue Dec 02, 2008 10:29 am
by RO8M
WACKO wrote: Image
Looks ver narce!!

But your coils look pretty closely spaced (to an untrained eye). Not going to suffer coil-lock before hitting the bump stops on up-travel?

Posted: Tue Dec 02, 2008 3:32 pm
by NJV6
They are coil overs.


Sam, looks good mate. Now build yourself a proper ramp to get the rear end working properly and then show us what it can do.....

Posted: Tue Dec 02, 2008 3:58 pm
by WACKO
Greg_M wrote:wouldn't want to blow a headlight globe now, might be a tad tricky to get to. Looks awesome though, SAS'd paj's look a whole lot better than lifted patrols IMO.
the buld thing did occur to me. especially after i put the airbox back in. theres even less room. but if it does happen, its just two screws to undo and i can access it just as easily as before.

and NJV6, ill take it up to turoas at some stage and put it on the proper ramp. gota do the breaks and put the short axle in first tho. wana have it running for a play in rallywoods in two weeks so hopefully i make it this time. the tyres gave me incentive again...

Posted: Thu Dec 04, 2008 1:08 pm
by RO8M
[quote="NJV6"]They are coil overs.

[quote]

Oops, looks like my noob is showing...
So why does that make a difference?

Posted: Thu Dec 04, 2008 2:41 pm
by WACKO
RO8M wrote:
NJV6 wrote:They are coil overs.

Oops, looks like my noob is showing...
So why does that make a difference?
your noob showing? im still wondering what coil lock is! nj saying they were coil overs made me think he answered it for me and i didnt have to look stupid.. :lol: im assuming its the coils hitting the chassis rails from the curve they get when extending or somthing?

Posted: Thu Dec 04, 2008 4:12 pm
by RO8M
WACKO wrote: your noob showing? im still wondering what coil lock is! nj saying they were coil overs made me think he answered it for me and i didnt have to look stupid.. :lol: im assuming its the coils hitting the chassis rails from the curve they get when extending or somthing?
hehehe. Nope, that's not what i meant by coil lock. Compression until the coils hit each other, therefore no more wheel travel. Coil-lock might be the wrong term. Minimum compressed length, is what i'm getting at.

Posted: Thu Dec 04, 2008 5:39 pm
by Turoa
they wont bottom out on teh coil as they were designed like that.

just over a week to go sam. I hope to see your paj at rallywoods ;)

Posted: Thu Dec 04, 2008 7:47 pm
by WACKO
Turoa wrote:they wont bottom out on teh coil as they were designed like that.

just over a week to go sam. I hope to see your paj at rallywoods ;)
you and me both!

Posted: Mon Dec 08, 2008 8:49 pm
by WACKO
ok... HELP NEEDED! im put the power steering belt back on today, when i started it up, was ok.. then i realised i hadnt put enough oil in so i put sum more in. now i have put about a litre or so in. now the problem is this... the steering violently goes from lock to lock by its self. so violetly when trying to stop it, it dam near bent my fingers off. goes from one side then snaps back the other way. also after only not even a minute the pump is almost too hot to touch and the lines are very warm to the feel, but this may be due to me slowing the spinning of the steering wheel to see if it is just doing it while circulating the oil or somtheing.
it also seems to be leaking slightly from the hight pressure line.
im guessing its not normal, so have i hooked something up backwards/wrong? does it just need a blead from somewhere? what am i missing?

cheers guys.

Posted: Wed Dec 10, 2008 10:24 pm
by pom300
hey man you used a toyota steering box right,are you still running the mitsubishi pump. mayby they run at differant pressures or differant speeds.dont really no man thats weird.but ya might have to make an adaptor for the toyota prado pump

Posted: Thu Dec 11, 2008 11:49 am
by toastmaster
well we found out that if you put the gear box out of the Gen 2 Pajero into the Gen 1 It was much more powerfull you bearly had to turn the wheel to turn the 35's not roling its awesome. Maybe you are at the Extreme end of things like pom300 says