Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Shed Insulation

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

pongo wrote:For a quick fix just wack up a sprinker on the roof and have it set fairly low so that it just does the job nicely.

Works really well and know a few blokes that use it every summer.
Very enviromentally friendly in these days of water shortages and drought.

Would go down real well too during those extended times of high water restrictions when you are not even allowed to wash your car.

Used to be a good option but unfortunately not very community and environmentally minded anymore.
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

fester2au wrote:
pongo wrote:For a quick fix just wack up a sprinker on the roof and have it set fairly low so that it just does the job nicely.

Works really well and know a few blokes that use it every summer.
Very enviromentally friendly in these days of water shortages and drought.

Would go down real well too during those extended times of high water restrictions when you are not even allowed to wash your car.

Used to be a good option but unfortunately not very community and environmentally minded anymore.
yeah this works well with tank water recirculating :)

OR,

if you have tanks and they are empty ( good way to fill yoru water tanks)


JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 90
Joined: Sat May 22, 2004 1:34 pm
Location: WA

Post by pulux »

Air Cell and anticon have much similar results I've found, but the former is much easier to work with. Heaps lighter, no itchiness, thats a good thing when you're laying metres and metres of the stuff all day. Either way its a night and day difference to having nothing up there.

I reckon take 2 sheets off one end initially, roll your insulation, replace first sheet over top screwing into original holes, keep working across lifting 1 or 2 sheets at a time til you're done. Easiest way to get your flashings etc to line up afterwards.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests