Page 2 of 3
Posted: Tue May 27, 2008 12:18 pm
by DEK44
nice trucks guys. awesome pics
Posted: Thu May 29, 2008 2:57 pm
by OzLuvTrucker
1980 KBD40 ISUZU (also known as a Chevy Luv)
C190 Diesel 4speed 4x4 4.555:1 Diffs
Torsion Bars Cranked To The Max
85 Jackaroo Brakes Upper Control Arms And Flipped Ball Joints
Custom Diff Drop Brackets
Posted: Tue Jun 03, 2008 8:18 pm
by Timbo(Rodeo)
1998 V6 Rodeo
Posted: Wed Jun 04, 2008 10:40 pm
by jasin
Posted: Thu Jun 19, 2008 9:38 am
by Chefboi
Posted: Fri Jun 20, 2008 5:36 pm
by TimRover
Here's one of our 3.9 isuzu land rover 110 county (4bd1)
By
longstroke
TIM.
Posted: Sat Jun 28, 2008 11:18 pm
by twinky
my truck, 3"suspention lift 2" body, boosted up turbo running 11 pound at the moment on the 4jb1t. 32x11.5 All Terrains on 15x8 sunraisers. has a front mount now 300x600x80 being plumbed up next weekend and also getting the exhaust done, 3.5" stainless with one hotdog running from the turbo along under the door and dumps just before the rear tyre. should be running around 15-16 pound once the intercooler is going. also im looking to upgrade the turbo (any ideas?)
http://img229.imageshack.us/my.php?image=twinkykv4.jpg
Posted: Thu Jul 03, 2008 2:38 pm
by MuVova
Posted: Tue Jul 08, 2008 4:03 pm
by Juzjen
how do you put an image up on this site so I can post it in a forum tech question I have asked?
Posted: Tue Jul 08, 2008 6:40 pm
by chikoroll_
load it up to photobucket.com (make an account)
then link it to here
Posted: Wed Jul 09, 2008 10:42 am
by MuVova
Hi, I'm new at it, but i was advised that photobucket was a bit slow... and sometimes the links disappear... I used
http://imageshack.us/
which is supposedly faster and you dont need to join (optional - which i might do later)
- in imageshack, find the "browse" button and click it... then select a photo on your pc to upload to their site
- then in the imageshack page it is a good idea to resize the pic, 1024*768 FILLS the screen... next time i will use 800*600
- then click the "host it" button
- the imageshack page will return a list of links.. at the very BOTTOM of that page is a link describes as "Direct link to image"
Highlight and copy that link...
- then in the Outerlimits Posting box, write your text (this will appear at the top of your pic
- then click the orange "Img" button which should display a square bracket '[' 'img' ']' ,
- paste the link copied from imageshack directly after that
- then click the 'img' button again which will insert '[' '/img' ']'
-add any text youd like after that too (which will appear at the bottom of your pic.
> you can add several pics in the same way. Dont forget EACH pic needs the Img button before and after
- then you can preview.. and submit ..
Looking forward to seeing your pics
[/img]
Posted: Wed Jul 09, 2008 10:54 am
by MuVova
After a loooong weekend underneath... bj flip (no spacers), keeping full rubbers & rear leaf over, opting to keep original shackles...
Posted: Wed Jul 09, 2008 5:49 pm
by chikoroll_
haha nice nose dive
how much rear lift?
Posted: Wed Jul 09, 2008 6:26 pm
by twinky
my garage (where i get all my work done) has told me that they are ordering a bunch of lift kits which are designed differently or sumthing, anyways they make it possible to lift the mu more than the normal 5 inches, when he has this lift availible i will be getting it straight away, he said it should put atleast another 5 inches on what i have already, making 35"x 12.5"'s possible. i am also designing a bad arse twin exhaust starting with a new turbo elbow, instead of the sufecating s bend of doom that it has atm. exhaust size will be 3 inch and have one cannon paralell to the side of the truck exiting before the back wheel, badass.
Posted: Wed Jul 09, 2008 6:34 pm
by chikoroll_
tapered body lift? or longer arms with a diffdrop?
Posted: Fri Jul 11, 2008 9:40 am
by twinky
i really dont know, ill find out for thos with the mu's cause i know evryone wants bigger lift. this could be the first leagal lift kit availible. to give a rough idea of how much it can lift, the owner of the place has a hilux and its raised of its tits running 35" tyres. hes going to use the raise kit on his lux and says its going to end up being about 5 inches of lift ontop of what he already has. not including the lift the 40" tyres will give him.
Posted: Fri Jul 11, 2008 11:41 am
by MuVova
Yawn.... good night run last night - 1st real go at it ... thanks Bart!
Measure for the MU lift (from wheel centre to top of wheel arch) on 33" tyres: Before-> front 510mm & rear 500mm: After-> front * 6 turns of the torsion bar adjustment = 540mm rear * spring over diff convertion = 640mm
Great rear flex! For the spring over (=diff drop?) needed to extend driveshaft 60mm, ground off and rewelded the spring perches on top, and doubled brake line to 800mm...
Next is spacers under the bj flip (some more front flex), hmmm need to adjust the headlights, and a front lokka one day....
Posted: Fri Jul 11, 2008 9:14 pm
by chikoroll_
muvova, a diff drop is for the IFS
the brackets that hold then diff get extended, either cut and re-weld or buy/build bigger brackets
http://forum.planetisuzoo.com/viewtopic ... =diff+drop
Posted: Sun Jul 13, 2008 9:29 pm
by twinky
yeh maybe aye i dont know, some kinda shit like that. i bought an xf falcon ute for 250
mad bush basher! 4 speed manual with redline intake manifold and holley carb, extractors and lsd, its my weekend burnout machine! :p pics soon!.
Posted: Mon Jul 14, 2008 9:53 pm
by r3kle55
Hey all. My bus is an '02 Jackaroo 3L Turbo Diesel. Can't complain about em except for the clearance but other than that its a beast. Great on the beach and superb fuel economy.
1991 Isuzu MU
Posted: Wed Jul 16, 2008 12:54 am
by blowout
Posted: Wed Jul 16, 2008 6:39 pm
by chikoroll_
lol that's an obvious bodylift
are you going to lift the front and rear bumpers?
Posted: Sat Jul 19, 2008 6:42 pm
by twinky
how did u get that much lift? and can you lock the front wheels fully? or do the tyres scrape the wheel arch?
Posted: Sat Aug 16, 2008 8:02 am
by Elysian
Blowout had to make a few more mods to get clearance..
Posted: Mon Aug 18, 2008 9:11 pm
by chikoroll_
haghaha might be time for a custom bullbar
my btothers 85 jackaroo
Posted: Sat Aug 23, 2008 5:04 pm
by Bourbon
m
Posted: Sat Aug 23, 2008 5:06 pm
by Bourbon
Posted: Sat Aug 23, 2008 5:12 pm
by Bourbon
Posted: Sat Aug 23, 2008 5:18 pm
by Bourbon
this is my brothers 85 turbo disel hunting wagon i am building for him ive done a 40mm suspention lift the rest u can see
Posted: Mon Sep 22, 2008 9:09 pm
by NISDEO
HEY PEOPLES IM ONLY NEW TO THIS SITE. HERE IS A DEO FOR YOUS.
S.A.S CONVERSION ON CUSTOM PATROL DIFFS, CUSTOM MADE PANARD,STEERING ARMS AND DRAG LINKS, CUSTOM LENGTH TOUGH DOG 40mm ADJUSTABLES, COMP SPEC KING SPRINGS, FRONT DIFF MOVED FORWARD 50mm, CUSTOM MADE DRIVESHAFTS, PATROL STEERING SETUP ETC ETC...... ONLY MY OLD 31'S AT MOMENT SINCE IM AN APPRENTICE AND USED ALL ME COIN ON THE CONVERSION HAHAHA