hopefully they will work for me
the car wont be daily driven so im not too concerned...
ATM im thinking comp car so it will maybe do 2000k a year if that....
thats if i stick with the 4d56 also
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engine options
Moderator: -Scott-
scored a set of new rockers and 4 out of 5 tunnel caps for $150 today
hopefully they will work for me
the car wont be daily driven so im not too concerned...
ATM im thinking comp car so it will maybe do 2000k a year if that....
thats if i stick with the 4d56 also
hopefully they will work for me
the car wont be daily driven so im not too concerned...
ATM im thinking comp car so it will maybe do 2000k a year if that....
thats if i stick with the 4d56 also
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
hey mate,
is a 4d55 the same head as a 4d56??? when i was looking for parts for my 4d55 there was 4d55/56 on things such as heads, short motors, etc... For a reco head for a 4d55/56 was about $1000.... If you are interested i have a head i pulled off my 4d55 last week sitting in my garage looking for a new home..... it was working perfectly when i pulled it off.... wouldnt be asking much as well.... probably $250 or lower.....
is a 4d55 the same head as a 4d56??? when i was looking for parts for my 4d55 there was 4d55/56 on things such as heads, short motors, etc... For a reco head for a 4d55/56 was about $1000.... If you are interested i have a head i pulled off my 4d55 last week sitting in my garage looking for a new home..... it was working perfectly when i pulled it off.... wouldnt be asking much as well.... probably $250 or lower.....
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
hey mate,
you said you were probably going to change the motor and gearbox for something more powerfuld and automatic.. i suggest a 3.8 commodore motor with the turbo 700 auto... there are kits for it from marks adaptors but the kit is going to cost $2000 when you can get a whole vp commodore with at least 6 months rego for that....
you said you were probably going to change the motor and gearbox for something more powerfuld and automatic.. i suggest a 3.8 commodore motor with the turbo 700 auto... there are kits for it from marks adaptors but the kit is going to cost $2000 when you can get a whole vp commodore with at least 6 months rego for that....
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
i may take you up on that offer if things dont work out in the next couple days..dans-paj92 wrote:hey mate,
is a 4d55 the same head as a 4d56??? when i was looking for parts for my 4d55 there was 4d55/56 on things such as heads, short motors, etc... For a reco head for a 4d55/56 was about $1000.... If you are interested i have a head i pulled off my 4d55 last week sitting in my garage looking for a new home..... it was working perfectly when i pulled it off.... wouldnt be asking much as well.... probably $250 or lower.....
but funds are a little low ATM
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
thats what i would do if the engine doesnt work out.dans-paj92 wrote:hey mate,
you said you were probably going to change the motor and gearbox for something more powerfuld and automatic.. i suggest a 3.8 commodore motor with the turbo 700 auto... there are kits for it from marks adaptors but the kit is going to cost $2000 when you can get a whole vp commodore with at least 6 months rego for that....
commo v6 and auto for $500 or so.... i have seen a few VNs go for even less. id probably try find a VS if possible
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
i installed the new cam caps and rockers today but i might have stripped one of the caps when putting it in 
im not sure and wont know till i turn it over i spose.
all i need to do now is find my feeler guages that i havnt used in years
probably have to just buy a new set
im not sure and wont know till i turn it over i spose.
all i need to do now is find my feeler guages that i havnt used in years
probably have to just buy a new set
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Or for four cartons of VBdans-paj92 wrote:hey mate,
you said you were probably going to change the motor and gearbox for something more powerfuld and automatic.. i suggest a 3.8 commodore motor with the turbo 700 auto... there are kits for it from marks adaptors but the kit is going to cost $2000 when you can get a whole vp commodore with at least 6 months rego for that....
Its a vp v6 commo for christ' sake...not a supercar
[quote="Ruffy"]P.S. woober woober is a technical term describing the audible tone emitted from harmonic air vibration.[/quote]
F/S Holden V6 auto to Mitsu kit incl exhaust for Triton conversion.
F/S Holden V6 auto to Mitsu kit incl exhaust for Triton conversion.
yeah mate,
im in no hurry if you want it, i was looking at doing a commodore motor change myself but cant fork over the $3500 that it would cost fully finished... are you still thinking of doing a SAS??
im in no hurry if you want it, i was looking at doing a commodore motor change myself but cant fork over the $3500 that it would cost fully finished... are you still thinking of doing a SAS??
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
fawk yehdans-paj92 wrote: are you still thinking of doing a SAS??
i just gotta get the engine running and then go from there..
next step is to speak to the guy il get to do the SAS and see what he recomends.
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Who is online
Users browsing this forum: No registered users and 0 guests