Page 2 of 3

Posted: Fri Jun 13, 2008 5:53 pm
by mischief
I'm definate

Posted: Sat Jun 14, 2008 9:35 am
by ferrit
Definate- PM me the final price for No Infills and shipping to Adelaide! :D

Posted: Mon Jun 16, 2008 3:31 pm
by booflux
Ok guys I finally got off my arse and sorted this out. Brooksy would like a deposit up front to cover materials also.

At this stage we have the following as definates or interested can you confirm or deny and fill in the blanks please.

Definates
krusty1- Lux d/c 03 2" Bodylift infills??
Ferrit-Hilux d/c 92 No bodylift No infills
Pilot-Hilux si/c ?? ?? ??

Maybes?
Sierrajim
benolux
luxyboy
huxlux
mischief
hixi26
fatng

Rod I have sent you a PM regarding the later model ones.

Posted: Mon Jun 16, 2008 5:07 pm
by BushTuckerNed
id be keen but my lux is a bit different and dunno if the mounts would match up

i got the T700 auto and dual trannies, so the cross member is further back.


does anyone know freight to melbourne?

Posted: Mon Jun 16, 2008 6:20 pm
by LOUIE
I have sent Brooksy an email the other day in regards to sliders and rear bar .
Count me in definately .
I have a 05 DUAL-CAB , no body-lift .
Chasing a black set of sliders , no infill required .
PM me and let me know the details as to what Brooksy wants in regards to depoist .
I am from the newhilux.net forum .
Cheers Jim

Posted: Mon Jun 16, 2008 6:34 pm
by mischief
i'm definate
2006 (current shape) standard x-tra cab, no body lift or anything.
I'll have it unpainted & no infills if that makes it any easier (if not i'll just go with the flow, thanks)
pm with total cost & amount needed for deposit & bank details.

Posted: Mon Jun 16, 2008 7:31 pm
by xrdave
Count me in on a set of sliders for a 150 series SR5 d/cab lux. :cool:

Posted: Mon Jun 16, 2008 8:43 pm
by pilot
i'm definately interested if he can do them how i asked in my pm booflux,mines 04 sc no lift with infills, has long range tank so i dunno if it interferes with the back mount, where abouts is he(bloke thats making them)

Posted: Mon Jun 16, 2008 9:00 pm
by ferrit
Mine also has a LR tank, but i cant see that affecting the mounts too much

And mines going to to have the body off it within a fortnight or so, so that makes it easy to fit them up! :D

Posted: Mon Jun 16, 2008 9:22 pm
by vSAHARAx
Hey Boof how long roughly will it take Brooksy to get the Lux's knocked over? Could we start a thread for the cruisers? Ill be ready in the next few weeks, for a set of sliders for the 80.

Will contact Brooksy in a few weeks time, i have a few ideas in order to make mine unique ;)

Troy

Posted: Tue Jun 17, 2008 7:14 am
by Sic Lux
You don't have to have neon's on them troy to look cool.

Posted: Tue Jun 17, 2008 7:06 pm
by hixi126
Count me in definately , 01 hilux extra cab with 2" body lift , and infills if possible :D :D :D when do you want the deposit??
:armsup:

Posted: Tue Jun 17, 2008 7:48 pm
by vSAHARAx
Sic Lux wrote:You don't have to have neon's on them troy to look cool.
neons....pfffft so 2005, lol

sorry for hi-jacking!

Posted: Wed Jun 18, 2008 12:29 pm
by booflux
Ok I have spoken to Brooksy about the infills prices are as below. If anyone needs freight we will be getting weights and measuremenst from mine on the weekend so that will help to work it out.

Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)

Posted: Wed Jun 18, 2008 1:38 pm
by Cool95
Boof,

Count me in as confirmed.... let me know of payment details:

recessed alum. checkerplate bolt in - $600

2008 Hilux dual cab D4D just in case the mounts may need to be altered I have a longranger fuel tank and OME 2" lift.

Cool95

Posted: Wed Jun 18, 2008 1:47 pm
by fatng
Boof

I'm in standard set $450 let us know payment details & freight cost to Melbounre.

To suit 89 dual cab no lift.

Posted: Wed Jun 18, 2008 7:04 pm
by hixi126
il go for
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
for 01 hilux extra cab with 2" body lift and it woild be great to have an estimate on frieght to wodonga , or even just the wieght and il do the homework myself mate
cheers

Posted: Wed Jun 18, 2008 8:30 pm
by BENOLUX
count me out booflux sorry, just got body lift and about to get tyres so no funds atm sorry.
Thanks heaps tho.

Posted: Wed Jun 18, 2008 9:19 pm
by zaclux
Definite.
Dual Cab 06 Hilux -
Would like recessed alum. plate (3mm) bolt in with dimple holes.
Also registered on www.newhiux.net

Cheers
Zac.

Posted: Thu Jun 19, 2008 12:14 am
by mischief
Definate

recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520 (unpainted)

2006 hilux x-tra cab

Posted: Thu Jun 19, 2008 2:06 pm
by booflux
I will be talking to brooksy about deposits and timeframes this weekend as we seem to have enough between the couple of forums.

Updated list
Definates
krusty1 - Hilux - d/c - 03 - 2" - infills??.........................$450.00
Ferrit - Hilux - d/c - 92 - none - none............................$450.00
Pilot - Hilux - s/c - 04 - none - none.............................$450.00
Louie - Hilux - d/c - 05 - none - none...........................$450.00
Mischief - Hilux - x/c - 06 - none - 2 tone......................$520.00
Xrdave - Hilux - d/c - 05 - none - none........................$450.00
Hixi126 - Hilux - x/c - 01 - 2" - 2 tone..........................$520.00
Cool 95 - Hilux - d/c - 08 - none - checkerplate............$600.00
Fatng - Hilux - d/c - 89 - none - none..........................$450.00
Zaclux - Hilux - d/c - 06 - none - aluminium.................$720.00

Maybes?
Sierrajim
luxyboy
huxlux

Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)

Posted: Thu Jun 19, 2008 2:17 pm
by pilot
put me as mayb, will let u know definite by sat

Posted: Thu Jun 19, 2008 11:08 pm
by LuxyBoy
Boof - Which version are yours :?:
I want the same as yours to fit a 91' dualcab no body lift getting my diff rebuilt at the moment but will have the funds again soon put me last on the list for making them and i should have the cash by then; can give deposit now though.

Posted: Fri Jun 20, 2008 12:52 am
by sierrajim
Updated list
Definates
krusty1 - Hilux - d/c - 03 - 2" - infills??.........................$450.00
Ferrit - Hilux - d/c - 92 - none - none............................$450.00
Pilot - Hilux - s/c - 04 - none - none.............................$450.00
Louie - Hilux - d/c - 05 - none - none...........................$450.00
Mischief - Hilux - x/c - 06 - none - 2 tone......................$520.00
Xrdave - Hilux - d/c - 05 - none - none........................$450.00
Hixi126 - Hilux - x/c - 01 - 2" - 2 tone..........................$520.00
Cool 95 - Hilux - d/c - 08 - none - checkerplate............$600.00
Fatng - Hilux - d/c - 89 - none - none..........................$450.00
Zaclux - Hilux - d/c - 06 - none - aluminium.................$720.00
Sierrajim - hilux d/c - 96 - no body lift - no in fills .........$450.00


Maybes?

luxyboy
huxlux

Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)

Posted: Fri Jun 20, 2008 7:09 pm
by pilot
sorry, i'm out.........

Posted: Sun Jun 22, 2008 7:22 pm
by krusty1
still a definite boof.no infills for me just the stockos.let me know when u want cash mate.
regards glenn. :)

Posted: Wed Jun 25, 2008 9:08 am
by booflux
Ok I have the weights etc anyone who wants freight costs if you could PM me you post code by the end of the week that would be good. Once I have sent those out I will start asking for deposits.

A 50% deposit is being asked for, once all the deposits are paid the sliders will be made and sent out. Should anyone drag on the deposit we will draw a line in the sand and anyone not paid misses out. I cant be any fairer than that as I know my mate is keen for his set at the moment as I am sure are others.

Posted: Wed Jun 25, 2008 9:42 am
by T-Roy
Hey Boof, I am definately keen for a set.

2006 Extra Cab, with bolt in checker plate infils

Will send PM with my post code.

Cheers
Troy

Posted: Wed Jun 25, 2008 5:18 pm
by LuxyBoy
Count me out the diff rebuild cost more than it was meant to; I'll see Brooksy when i am ready.

Posted: Sat Jun 28, 2008 7:35 pm
by nastie
I'm in on these:
recessed alum. checkerplate bolt in - $600

I have an 06 D/C Lux, no body lift.

Pref, unpainted.

Cheers!