Outer Limits 4x4 Board

hi guys just thought i would let you know i have a mate with a turboed 4.0 falcon engine that was fully rebuilt for an f100 he wants to sell. that would be great for what you are talking

PM me if you are interested and i will give you his phone number

madjimmy wrote:hi ray185 con you show me a shot of your belt after you took off the a/c iam up to the same point

p.s i found a speedo adapater that plugs into the ford loom and fits my 75 series box. autobarn.

and also what did you do about the oil filter

I used a Gen toyota filter 90915-YZZD2. Z418 in a Ryco. Was the right thread, sealing face and just short enough no to ful the chassis.

Bit hard to get a pic of the tensioner I made for the belt without pulling bits off. I'll try and get a pic for you soon though.

So more details on the adapter you found....got a pic?

302 cruiser wrote:hi guys just thought i would let you know i have a mate with a turboed 4.0 falcon engine that was fully rebuilt for an f100 he wants to sell. that would be great for what you are talking

PM me if you are interested and i will give you his phone number

Iis that the one that was advisted on here for like $4500?

thanks for your reply, I don,t have the part yet ,$ 186 from autobarn.
the reason i am trying to use all the wiring loom is to get rid of all the gauges i have ,couse the ones in my speedo cluster did not work.
My sparky said to get all of the looms to make a simple swap.

the speedo converter is eletronic impolse sender ,more info when i get the part in the next few days.


p.s today i did my shackle reversal to 75 sreies diffs and fitted the motor and gear box again,and took photos.

cheers jimmy

madjimmy wrote:thanks for your reply, I don,t have the part yet ,$ 186 from autobarn.
the reason i am trying to use all the wiring loom is to get rid of all the gauges i have ,couse the ones in my speedo cluster did not work.
My sparky said to get all of the looms to make a simple swap.

the speedo converter is eletronic impolse sender ,more info when i get the part in the next few days.


p.s today i did my shackle reversal to 75 sreies diffs and fitted the motor and gear box again,and took photos.

cheers jimmy

Don't be a tease, post up the photos.

how???????

cheers, jimmy

Have a read of this: http://www.outerlimits4x4.com/phpBB2/forum11.php

I hope this works , this is where I am up to now.

thanks ray for your help, as you can see i have got the oil filter on and a easy fit send more photos later. going to do more welding on the frount hangers . cheers jimmy

Jimmy's pics

Pics of my tensioner. Can't remember the length of the belt, I think its a 6pk1080 but the numbers have rubbed off a bit.

GREAT photos ray thats about what i was thinking of doing, did you get pully off the a/c or the tensioner.

I used one of the pulleys off the auto tensioner from memory. Definately didn'tuse the a/c pulley.

Jimmy, sign up to www.photobucket.com to get an album that you can upload your photos to. If you can't figure it out from there let me know and I'll guide you through it.

WICKED wrote:

302 cruiser wrote:hi guys just thought i would let you know i have a mate with a turboed 4.0 falcon engine that was fully rebuilt for an f100 he wants to sell. that would be great for what you are talking

PM me if you are interested and i will give you his phone number

Iis that the one that was advisted on here for like $4500?

its actually a 4.1 crossflow out of an 86 f250.shitloads spent-balanced etc.
comes complete from fan to flywheel.open to offers/swaps.

265grunter wrote:

WICKED wrote:

302 cruiser wrote:hi guys just thought i would let you know i have a mate with a turboed 4.0 falcon engine that was fully rebuilt for an f100 he wants to sell. that would be great for what you are talking

PM me if you are interested and i will give you his phone number

Iis that the one that was advisted on here for like $4500?

its actually a 4.1 crossflow out of an 86 f250.shitloads spent-balanced etc.
comes complete from fan to flywheel.open to offers/swaps.

didn't think the yanks had crossflows??? they seem to love getting our xflow heads to bolt to their 6 cyl bottom ends...

hi , ray i got the ps 1080 belt but it is way to short , can you put a tape on yours please. cheers jimmy

Sorry Jimmy, I was way off(going on memory). Just checked with the spare belt I keep in the back (don't know why I didn't think to check this last time) and its 6PK1930. All depends how far out you made your tensioner but that should get you in the ballpark.

thanks mate i,ll try and get it working. cheers jimmy

If you run an aftermarket computer on the motor...you may have issues with the engineer?motor not ADR'd...so keep it quiet and make it look std
Andrew.