Have you been through the process of engineering a vehicle? Do you understand what it's all about? It certainly doesn't sound like it.
Shadow wrote:Why do you need 33" tyres?? What is standard for a pajero, 29"??? To fit 33" tyres, did you have to lift your vehicle? (raising the COG, increasing the rollover risk), Did you upgrade your braking? (reduced braking capacity due to larger rolling diameter of tyres) did you strengthen your steering components? (turning bigger wider rubber will stress the steering components more than mitsubishi intended it)
My Paj came standard with 30" tyres. Whether or not I need 33" tyres is irrelevant - do you need a 4wd?
What is relevant is that I wanted them, as do many others.
I actually lifted the vehicle for other reasons (body lift to fit a larger long range fuel tank), then fitted 33" tyres simply because I could. The rest of your issues were addressed by the engineer, and found to comply with the intent of the ADRs. Steering, braking and handling were tested on a race track (the exact same race track using the exact same lane change marks that Mitsubishi Australia used when they originally tested my model Pajero) and were found to be significantly better than he expected.
South Australia has tested my vehicle and has declared it safe to travel Australian roads. Queensland wanted to pretend I hadn't modified it at all.
Shadow wrote:All these things might be insignificant to most automotive engineers. But perhaps the one that set the modification guidlines in QLD decided they are significant.
They are all significant, to all engineers qualified to sign off on these modifications. Those that set the guidelines in Qld took the easy way out, throwing it all in the too hard basket, and legislating a simple "no."
So, instead of allowing some leeway, and retaining some control over some modified vehicles they closed their eyes and pretended there was no issue.
This has lead to a significant number of 4wds running larger tyres, with all the attendant issues you have identified, driving around on Queensland roads with absolutely zero input from a qualified person. You think this is a good thing?
Yes, occasionally one will get pulled over and ticketed, but the rest of them continue to drive with what amounts to backyard modifications which have never been checked, which may or may not be safe, because some faceless bureaucrat decided it was too hard to find a workable compromise.
You think this makes Queensland safer than NSW, Victoria or SA?
Don't bother answering. That's a rhetorical question.
Shadow wrote:There are cars legally registered in nsw with 8" lift and 37" + tyres. Are these safe? Are they as safe as the same vehicle in factory standard condition? Swerve around a ladder falling off the back of a ute at 100 and tell me they are as safe.
This indicates that you have no idea what ADRs are about, or the vehicle modification approvals process.
What 4wd do you drive? Lets take that factory standard 4wd and try your swerve test, then we'll do it in my daily driver - I can guarantee my dd will out-handle your 4wd. By your argument, you shouldn't be on the road.