Outer Limits 4x4 Board

Posted: **Thu Jan 01, 2009 5:45 pm**

Flares front and rear for wagons/SWBs that have cut there wheel arches bigger.

Below is a example of the flares on a Norway GQ running 37s with a 3 inch suspesnion lift.

Posted: **Fri Jan 02, 2009 11:44 am**

Hows those guards coming along?

I would love to grab a couple soon!

Posted: **Sun Feb 22, 2009 8:51 pm**

Sorry i havent stayed up to date, works been flat out. where i stand is
1. currently have a GU scoop mould
2. soon to have GU fibreglass front guards(about a month)
3 soon to have GQ bonnet with 2 gu scoops in it
Cheers
sorry for the delay

Posted: **Sun Feb 22, 2009 8:52 pm**

Gq front guards are in the pipeline as well

Posted: **Sun Feb 22, 2009 8:58 pm**

price on GU scoop?

Posted: **Sun Feb 22, 2009 9:42 pm**

was asked earlier but didnt get an answer, will they all just bolt on or will they need to be the removable pin type attachment

Posted: **Mon Feb 23, 2009 6:17 am**

How about bonnets for GU - no scoops

Posted: **Mon Feb 23, 2009 9:59 am**

Price on a GQ bonnet with 2 gu scoops in it would be nice.

Thanks Mate

Posted: **Mon Feb 23, 2009 10:15 am**

How about a contact # or email address, so people can ask you stuff, instead of 239230948 posts askin and waiting

Posted: **Mon Feb 23, 2009 10:34 am**

Have you nutted out the final prices yet? And any pics

Posted: **Mon Feb 23, 2009 10:36 am**

Yeh thats a fair point cheers bogged.
email
apaulh@iinet.net.au

1. GU scoop comes white. $80
2. all other parsts are still a month or two away.
3. no dont need to be removable pin at the hinged end but yes at the front.
4. next mould that will be ready are the GU front guards and flare as same part.

5. i can tell there is alot of intrest. be aware i am only working outside work hours so production will be limited for the time being.

Posted: **Fri Mar 13, 2009 11:45 pm**

GQ bonnet with larger scoop than GU, say to suit a 450mm x 300 intercooler would be good.

Posted: **Mon Mar 16, 2009 2:34 pm**

hope this is not counted as a thread jack- but a guy in Hamilton, New Zealand sells fibreglass GQ front guards with a raised arch/box (he cut it out and re-set it in higher up) for a very very nice price.

I could post more information if anyone is itnersted.

I'd love a set for my 37" creepys.

Posted: **Mon Mar 16, 2009 3:30 pm**

flyingbrick wrote:hope this is not counted as a thread jack- but a guy in Hamilton, New Zealand sells fibreglass GQ front guards with a raised arch/box (he cut it out and re-set it in higher up) for a very very nice price.

I could post more information if anyone is itnersted.

I'd love a set for my 37" creepys.

Start another thread with pics, info and prices.

Posted: **Mon Mar 16, 2009 4:53 pm**

GUJohnno wrote:GQ bonnet with larger scoop than GU, say to suit a 450mm x 300 intercooler would be good.

you need a scoop from a early model subaru WRX

Posted: **Mon Mar 16, 2009 8:19 pm**

GQ4.2 wrote:
GUJohnno wrote:GQ bonnet with larger scoop than GU, say to suit a 450mm x 300 intercooler would be good.
you need a scoop from a early model subaru WRX

I've looked at the Subaru units but they dont seem to be deep enough. Certainly wide and high enough though

Posted: **Sat Jun 13, 2009 12:08 am**

GUJohnno wrote:
GQ4.2 wrote:
GUJohnno wrote:GQ bonnet with larger scoop than GU, say to suit a 450mm x 300 intercooler would be good.
you need a scoop from a early model subaru WRX
I've looked at the Subaru units but they dont seem to be deep enough. Certainly wide and high enough though

Diggity.
I believe a stock GU scoop size but with a higher opening, like the WRX sized opening would be great. like this one

The other option is one facing the other way, like A9X style(reverse).. you could then fit 2 large fans in there to force the fresh air through...

Posted: **Sat Jun 13, 2009 12:26 am**

same story here...... pushed out GQ guards to fit 37" 12.5 rubber under with a GU wheel track. plus a generous lip under the edge to run self tappers in for rubber flares if needed.....
Also gauge pods for the pillar on a GQ as well and maybe some for the dash top that aren't to bling bling..... just functional that you can mount a GPS on top off........

Harb

Posted: **Sat Jun 13, 2009 5:17 am**

Hi, any chance we can get a price on the GQ bonnet with the twin GU scoops in it. I am very keen. I am in the NT tho and would need to talk about freight cost.

Posted: **Sun Jun 14, 2009 5:40 pm**

GU guard prices yet?

Posted: **Wed Jun 17, 2009 9:03 pm**

HEY EVERY ON IM BACK AROUND HERE AGAIN

been here before lol lol lol

we have

std gq glass guards
modified gq glass guards (made for 37,s)
i made the ones on cheezys blk mav that fitted 46,s on it

std gq bonnets
gq light weight glass race bonnets
gq carbonfiber bonnets (sold out first lot more coming soon ..orders guys )
gu carbonfiber bonnets series 123 (3 left in stock now ! )
gu carbonfiber bonnets series 4 (2 left in stock )

call if your serious
hayden 0411 306 254

Posted: **Wed Jun 17, 2009 9:53 pm**

what about bonnet scoops as above?

Posted: **Wed Jun 17, 2009 10:55 pm**

im onto it asap

Posted: **Wed Jun 17, 2009 11:48 pm**

Posted: **Thu Jun 18, 2009 12:08 am**

Posted: **Thu Jun 18, 2009 1:18 am**

ALPINE-OFF-ROAD wrote:

Price and wieght please.

Posted: **Thu Jun 18, 2009 10:39 am**

We ar ealso in Geelong, and been looking for some body parts to be made in f/g for bigger wheels etc.

Can you contact us regarding these mr Navara04 ?

03 522 11 371

Posted: **Thu Jun 18, 2009 11:18 am**

Assassin_Offroad wrote:We ar ealso in Geelong, and been looking for some body parts to be made in f/g for bigger wheels etc.

Can you contact us regarding these mr Navara04 ?

03 522 11 371

I've emailed him to see if the scoops are an option
Edit: Address rejected paulh@iinet.net.au (state 14).

Posted: **Mon Jun 29, 2009 10:46 pm**

ALPINE-OFF-ROAD wrote:im onto it asap

any word on scoops?

Posted: **Tue Jul 07, 2009 4:43 pm**

got a price on the gu gaurds yet?

Outer Limits 4x4 Board

Fiberglass front guards and bonnets

ALPINE OFF ROAD ACCESSORIES 0411 306 254

Re: ALPINE OFF ROAD ACCESSORIES 0411 306 254