Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TIG welding tips, holes in weld

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

Post by one_waz »

sorry no pics. from memory i think the first attempt was at about 7 o'clock at night i dont think it was overly humid or anything so im pretty confident that it was poor preperation that was the cause of the porosity

Thanks for the link on the gas lense might have a look around for one, increased gas coverage can only help the cause.

i agree with zagan, all welding forms have a place, stick is extremly versitile you can basically use it under any conditions, MIG is just easier and faster when done properly. I just get more satisfaction out of a good TIG weld

cheers
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests