Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

big kick ass troopys

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Gav75 wrote: I'm about to order 16x8 with neg 34.
off-topic, but am i correct that they are same as 100 series stud pattern?

If so, where did you order them with the 34 offset?

Mike
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

Wambat wrote:
dogbreath_48 wrote:
Wambat wrote:thanks dogbreath, thats got my hopes up to be running 37s at a maximum of 2 inch lift, as i dont want any higher, i dont mind having to fab up new inner guards.


keep the pics coming guys, we all need more inspiration
Factor in some diff gears too. I run 4.56 which i find ideal for my use.
would those gear ratios be ok with 33s and 35s, as i have a spare diff at home, and will eventually get it locked, and same with the front, so if those gears work ok with the smaller tyres, i may put them in before i have the tyres, so that its done once not twice.

hulsty, i would also like to be enlightened about the h55f information, and i do run that box

cheers guys

Al
I'm in the process of putting a 12HT auto transfer behind my H55F. Most Aus spec H55F's that i've found have a ~1.9 ratio low range, the 12HT auto i've sourced has a ~2.3 ratio low range. Which is roughly equivalent to running 4.88 ratio diffs in low range with not change in high.
Posts: 55
Joined: Sun Nov 25, 2007 7:51 pm
Location: Benders

Post by Gav75 »

mike_nofx wrote:
Gav75 wrote: I'm about to order 16x8 with neg 34.
off-topic, but am i correct that they are same as 100 series stud pattern?

If so, where did you order them with the 34 offset?

Mike
Greater City Tyres Bendigo is where I was going to order them.
I think they might be ROH wheels. Most/some wheel
manufacturers will make rims to order. I spoke to the service guy
at the tyre shop and told him I wanted 16x8 with neg 34 offest.
He quoted me $100 a rim. I think I might be able to do better though.
If you have a local tyre shop, not big franchise, they will be more
willing to go the extra mile and your suporting small Aussie business.

Not sure if the 100 series has 6 or 5 stud. Think its 5 stud though.
Whatever it is a decent tyre mob should be able to get whatever you
want. Go talk to the tyre shop and tell them what you want.

Cheers.
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

nice troopys guys,pcman,the old girl has come up well
Posts: 6
Joined: Thu Jun 18, 2009 8:28 pm
Location: Cairns

Post by SuperCruiser »

Great thread! Amazing what hits you get when "troopy flex" is googled!

http://actatc.org/main.php/v/trips/2005 ... s.JPG.html
Posts: 7
Joined: Fri Jan 02, 2009 4:43 am
Location: Baltic Sea Germany

Post by soenke »

a HZJ 78 on 325/80R16 ->37"

Image

Image




www.offroad-schmiede.com made the pop up roof
www.custom-manufacture.de/automobile_hzj78.html is resposible for the air suspensionsystem :!: and the side door.
The car was built for comfortable weekend tours and travelling in Iceland during summer...

greetings Sönke

HDJ 80 with J4 cab and hydraulic cabin
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

poptop roof = goodbye rusty roof pressing..
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Posts: 6
Joined: Thu Jun 18, 2009 8:28 pm
Location: Cairns

Post by SuperCruiser »

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests