Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Patrol front end mega flex

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

rammer60 wrote:have seen these work on a 7" lifted troll ute, with plenty of grunt, power up steep off camber hills, down some gnarly off camber hills, and generally perform very well in a local comp in various terrain, very well. so far cant pick a negative. then stuck the bolt in n drove it home, one very happy owner
Are you kidding! :roll:
Maybe Myself "Superior", Snake, Thirds, Dobins and Nissan ( and other manufacturs i have not mentioned " apologies")should have just sold a pullout pin for $99 as a "offroad Pack " instead of the R&D we all done. We could have been millionaires :? ( I am sure a million other nissan owners since 89 have thought of this.

Maybe i am missing something but i need someone to explain the difference in this Setup from just pullin the bolt out of a radius arm, the public would save themselves $1500 ? Nothing negative towards the guy who posted but i cant understand it??
All i can see is way more negatives to positives and a very dangerous design. Their are heaps of better options on the market for just as much flex and heaps cheaper ! :? :?
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

1MadEngineer wrote:i can sell you THIS to replace the front bolt on the passenger side......

Image

similar handling and performance.

And for the SPECIAL intruductory price of $1500 :lol:
Can I get one for each side?
Posts: 72
Joined: Sat Oct 04, 2008 12:26 pm
Location: over here

Post by TomSeth »

Since when? Have never "needed" to run swaybars on my shorty with superior arms, in fact, they aren't even drilled to bolt them on to start with
He's right..,,
Posts: 66
Joined: Wed Feb 28, 2007 6:36 pm
Location: Southport

Post by Brutus »

When removing one passengers side front bolt the remaining 3 are un able to stop the diff from rotating around under your 4by and tearing the shit out of the drivers side bushes letting the passengers front wheel move loosely front to back

With the Mega flex arms the arms are still a 3 point fixing for each arm the back into the chassis and the 2 on the diff this arrangement stops all lateral movement front to back that is why Nissan, Suzuki, Range rover & Toyota all use and have used this method

Image
ALL METAL MAGIC engineering lasercutting pressbreak gillotine pipe/tube/RHS bending & rolling welding powdercoating & steel supplies
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

bogged wrote:
1MadEngineer wrote:i can sell you THIS to replace the front bolt on the passenger side......

Image

similar handling and performance.

And for the SPECIAL intruductory price of $1500 :lol:
Can I get one for each side?
I feel an outers group buy in the making. I'll take 4 :D
Posts: 49
Joined: Fri Feb 16, 2007 1:57 pm
Location: Perth

Post by Leeroy »

As the pivot on the passenger's side moves it will pull that side of the diff back toward the rear of the car, you would need to chop a lot more out of your guards to clear your tyres if they were already fairly close with your previous arms. Can you tell us how close the passenger front tyre comes to the guard in full up travel compared to your previous set up?

And in the real world does it steer itself in an uncomfortable way?
Posts: 66
Joined: Wed Feb 28, 2007 6:36 pm
Location: Southport

Post by Brutus »

Under full tuck the tucked side compressrd 150mm more than standard
ALL METAL MAGIC engineering lasercutting pressbreak gillotine pipe/tube/RHS bending & rolling welding powdercoating & steel supplies
Posts: 66
Joined: Wed Feb 28, 2007 6:36 pm
Location: Southport

brutus

Post by Brutus »

GQ ute wwith mega flex arms
Last edited by Brutus on Wed Dec 02, 2009 3:07 pm, edited 1 time in total.
ALL METAL MAGIC engineering lasercutting pressbreak gillotine pipe/tube/RHS bending & rolling welding powdercoating & steel supplies
Posts: 66
Joined: Wed Feb 28, 2007 6:36 pm
Location: Southport

brutus

Post by Brutus »

more pics to come of 4bys playing
Last edited by Brutus on Wed Dec 02, 2009 3:09 pm, edited 1 time in total.
ALL METAL MAGIC engineering lasercutting pressbreak gillotine pipe/tube/RHS bending & rolling welding powdercoating & steel supplies
Posts: 66
Joined: Wed Feb 28, 2007 6:36 pm
Location: Southport

mega flex arms

Post by Brutus »

GQ ute 7 inch lift with mega flex arms
Image
ALL METAL MAGIC engineering lasercutting pressbreak gillotine pipe/tube/RHS bending & rolling welding powdercoating & steel supplies
Posts: 17
Joined: Sun Apr 18, 2010 6:01 pm
Location: windsor

Re: Patrol front end mega flex

Post by moto_pilot »

I know this is an old topic but ia was wondering if you are still running these arms, if so i think they have proven themselves. Are you still making them?
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Re: Patrol front end mega flex

Post by Wozza244 »

Yeah id be interested in the outcome here as there has been over 2yrs of R&D go into them, but i havent heard of anyone using them myself.
Anyone know?
Last edited by Wozza244 on Wed Oct 26, 2011 7:14 pm, edited 1 time in total.
Get out there!!
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Re: Patrol front end mega flex

Post by tanz-e »

bogged wrote:
Brutus wrote:I disconnected the shock and got even more travel.
I'm amazed by that.
Bogged's back??!!
And he's making funny comments... :lol: :lol: :lol:
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Re: Patrol front end mega flex

Post by tanz-e »

awwwww... old topic. missed that comment
Posts: 117
Joined: Fri Nov 20, 2009 7:24 pm
Location: mt crosby

Re: Patrol front end mega flex

Post by was a 75 »

do those pins fit 9 inch shackles? :D :D
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Re: Patrol front end mega flex

Post by hammey »

tanz-e wrote:
bogged wrote:
Brutus wrote:I disconnected the shock and got even more travel.
I'm amazed by that.
Bogged's back??!!
And he's making funny comments... :lol: :lol: :lol:
That was my first thought to....

I miss bogged :cry:
innovation is better, better is faster, and fast is all that counts
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Re: Patrol front end mega flex

Post by gu town »

bogged, who's bogged?
GU td42 ute with go fast bits and go futher bits
Post Reply

Who is online

Users browsing this forum: No registered users and 57 guests